ronald Johnston
Reviewed in the United States on April 14, 2023
Product fit exactly as described on web. Easy installation.
jose marchan
Reviewed in the United States on July 8, 2022
Not a bad upgrade for the money. i should have gone for the chrome ones to match the ac vents
key
Reviewed in the United States on October 31, 2022
Very nice look in my 2015 xlt
Customer
Reviewed in the United States on April 8, 2021
The trim center trim peice did not fit properly. I communicated with seller and was told I would get another peice. That was 4weeks ago. Nothing!!
Customer
Reviewed in the United States on March 10, 2020
Product looks nice and the side wings fit nicely but the bottom piece didn't fit well. Wasn't enough of 3M tape to make it adhere properly. Good value for the product, just buy some "real" 3M tape to add for good adhesion.
Customer
Reviewed in the United States on December 29, 2020
these look great installed. However the piece for the center is slightly mis-formed (doesn't follow the curve of the dash eaxactly) I did put a little extra tape on it to help it form to the exact curve of the dash. (not a big deal, just a heads up)
Mark C.
Reviewed in the United States on December 26, 2020
The Voodonala brand of this interior trim is the one to go with. Their quality is consistent across the F150 interior upgrade pieces. Makes an STX look like a $$ bucks. I suggest getting some extra 3M at your local parts store before beginning install. I wouldn't put this on in the winter months at all as it REQUIRES A HEATED surface for best adhesion. That is the only precaution I would give on this for best results, or in a heated garage. I let my F150 stay out in the sun for several hours with the windows rolled up to get the interior surfaces into the 90's. A good quality hair dryer is all you need. TIP: Hold the piece you are about to install OVER THE INSTALL LOCATION and heat BOTH up at the SAME TIME during your prep stage. This saves a lot of time, ensures the right temp for 3M tape bonding, and provides an even heat temp across the surface areas.I got the Satin air outlets, steering wheel, instrument cluster trim, and rear cup holder (rear passenger) trim pieces. The Satin is a rich luster finish, not obtrusive or "cheap" looking, smooth transition application that looks like it came from the factory. The chrome would have been too reflective and stand out too much. Satin looks like you are in a Platinum. Fits a '20 F150 STX like a glove. No trimming required, even for the steering wheel or the instrument cluster trim. DO APPLY extra 3M on the instrument cluster trim though - especially on the piece between the steering wheel and the cluster. DON'T FORGET TO HEAT both at the same time. Just hold the piece over the location it is being installed at and that will ensure consistent prep for both the piece and the area it is being taped on to. DON'T USE CHEAP TAPE - use 3M. You can get it at your local parts store. Get the 1/4" (or thinner) or else you will have to cut it thinner to fit on the trim pieces. Unsticking the 3M tape film is time consuming and frustrating. The more tape the better, just get everything at least up to 95' before your final application pressure. Hand pressure is all that is required, but the 95' ~ 110' temp is the most important thing to remember.PROs:* Colors are consistent and look factory quality* Super easy to install* Fitment was accurate* Very inexpensive upgrade that doesn't "feel" cheap* Enhances the otherwise dark interior of the F150 to a subdued and comfortable ambience* Fits a 2020 STX/XL like a glove.CONS:* Not all parts are "picture perfect" Look at each part before your final glue. Sand off any rough burrs on the outside edges before applyingMakes an STX look like a Platinum.
Bud
Reviewed in the United States on November 4, 2019
Looks great. Fits my 2019 f250xL great