| Item Type | Generator Transfer Switch |
| Material | PC |
| Voltage | Rated Working Voltage: AC400V; Control Voltage: 220V; Rated Isolation Voltage Ui: 1000V; Rated Impulse Withstand Voltage Uimp: 8KV |
| Current | Rated Short Time Withstand Current: 9kA |
| Usage Category | AC 33B |
| Rated Production Capacity | 10Ie |
| Rated Breaking Capacity | 10Ie |
| Rated Power | 50, 60HZ |
| Grade | PC |
| Working Temperature | - 20 to 45 ℃ (24h average value shall not exceed 35 ℃) |
| Operating Humidity | The average humidity at 40 ℃ shall not exceed 50%, and no condensation is allowed. |
| Package List | 1 x Generator Transfer Switch; 1 x Handle; 2 x Key; 1 x Manual; 12 x Bolt; 12 x Nut |
| Note | 1. The left and right mounting brackets of the change over switch must be fixed on the same flat plane. The size of the mounting hole should be adjusted according to the actual situation. It is strictly prohibited to use the wrong size of the opening to forcibly install the switch, which will lead to the internal deformation of the switch, or even direct damage to the switch. 2. It is recommended to use busbar for the installation of switches 2000A. If the cable installation will increase |
