wifi mobile app remote control

This Rfid access control keypad is free Tuya APP, you can view access logs, land remotely control the device and manage users from anywhere anytime in the world via smartphone, tablet or computer. You can invite your family to control your smart home together and reset the recurring or individual timer schedule to turn on/off devices as needed.

IP67 Outdoor Waterproof Design

This access control keypad with strong zinc alloy Shell Case, impact resistance and wear resistance, anti-vandal and weatherproof.Epoxy to completely encapsulated, Back potting treatment, effective against water ingress, heat, corrosion.Operation temperature: -45℃~60℃ / -49℉~140℉ and the operating humidity is 10-90 percent RH.Suitable for mounting either indoor or outdoor.

three ways open door Multiple Access Ways

Supports 125Khz rfid keyfobs EM ID card unlock, password unlock, tuya Mobile APP Remote unlock.

RFID key fobs. Access control systems provide you the ability to lock and unlock doors.

Tuya APP remotely control the keypad device and manage users from anywhere, share, modify and delete passwords/ID cards. View door opening records.

wiegand input and output mode

• User Capacity : 2000
• Method: RFID card, password, Tuya APP
• Waterproof level: IP68
• WG interface: WG26 input+output
• Working Frequency: 125KHz
• Card Reading Distance : 1 ~ 6 cm
• Frequency: 125khz
• Operation Temperature: -45℃~60℃ / -49℉~140℉

work with access contorl system kit

This Access control keypad work with access control electric lock such as magnetic lock、electric bolt lock、strike lock ect.and support door release exit button switch.access control power adapter 3A/5A ,door bell

Backlight Keypad and metal keys

This Access control keypad with blue backlight features keys, you can see the keypad numbers at night or in the dark outside the home.

Access control keypad can be used for stand alone access control, or used as a reader.

There is an internal sounder that is used to indicate key press feedback, and Red Yellow Green LED to indicate operation.

Red light stands for enter into programming mode, Yellow light for in the programming mode, Green light for operation successful mode.

installation keypad Note

This keypad can be used with most third party garage door/gate openers or swing/sliding door openers, whose control board accepts “normally open dry contact” signal, powered by the openers control board or powered by an external DC 12V power supply control.

If your garage door/sliding door openers has a wired wall push button wiring port, supports run by wired wall push button, then it's compatible with the keypad.

Install:

• Remove the back cover from the keypad using the supplied special screw driver
• Drill 2 holes on the wall for the Self tapping screws and 1 hole for the cable
• Put the supplied rubber bungs into the 2 holes
• Fix the back cover firmly on the wall with 2 Self tapping screws
• Thread the cable through the cable hole
• Attach the keypad to the back cover