Your cart is empty.
Your cart is empty.Workman MH4B CB Radio Microphone Holder With Adhesive Back
Robert K.
Reviewed in the United States on May 21, 2024
Works well but double sided tape does not holds well. Added velcro to hold in place.
SmartShopper
Reviewed in the United States on March 9, 2022
The adhesive is garbage but the product is excellent and very fairly priced just be prepared to buy your own double faced tape
stmurtha
Reviewed in the United States on January 5, 2022
Could come with extra adhesive pad. Mine was damaged while trying to remove protective paper and I had to replace with something that keeps coming off.
Jill L.
Reviewed in the United States on April 28, 2022
Far too expensive for what you’re receiving.I noticed right from the get go that the back of this product wasn’t flat and most likely would not sit flat against my dash panel. I lightly sanded (in a cross hatch pattern) the back of this microphone holder so as to have good adhesion with the supplied double stick tape. I used alcohol to clean both surfaces before applying the tape. Well, It only took a few minutes before the tape came loose from the plastic. Not only that, but for seven dollars, it should have a means to keep the mic from dangling around.My opinion; it’s a 10 cent piece of junk plastic.
Grant Fritchey
Reviewed in the United States on January 30, 2021
The holder itself is constructed out of a decent plastic. The size & shape is pretty good to act as a holder for the microphone. My Yeasu FTM-300DR mic fit it just right. Well, until it fell off. See, the adhesive, the double-sided tape that you need to mount this, was just horrid. Really, really horrid. It didn't stick at all. The weight of the microphone, which is negligible, was too much for it. I can still use this, but I now have to track down some good double-sided tape. The price on this is pretty good, considering, but plan ahead, you'll need to bring your own tape.
Jarl Seamus
Reviewed in the United States on August 30, 2020
I was going to use this to mount my mic on the dash horizontally, as the black plastic would blend in better than a big chrome one, but there is no retention in this holder. If you hang it vertically, like 90% of applications, it's great. I don't worry about the cheap self adhesive thingy, as I either use proper adhesive or a screw anyway. But bonus points to the manufacturer for not sticking one side on the holder and making removal a pain. Quality wise, the molding is clean and precise, the ABS plastic seems strong enough and the slot is the correct size to hold the microphone stud without a lot of slop but be easy to insert.Overall, a good holder, just don't rely on the cheesy self adhesive pad.
Brad Gawlik
Reviewed in the United States on November 24, 2020
The sticky pad kinda sucked, but with some additional glue, it stuck like a champ even in the TX heat!
Tiph777
Reviewed in the United States on January 5, 2017
Quality clip, adhesive not so great. I recommend using a piece of 3M double sided tape if you want this to stick.
Recommended Products
