Your cart is empty.
Your cart is empty. Features:
This is the Ribbon Cable for the Phantom 3 Will ONLY fit the Standard Model, will NOT fit the Professional/Advanced.
Double sided tape included for easier DIY installation.
Cable end stiffeners designed for easy insertion into PC board connectors for DIY installers.
Installation instructions or tools not included.
Package Include:
1 x Flexible Gimbal Flat Ribbon Flex Cable Replacement
Mortjsf
Reviewed in the United States on July 27, 2023
Will show the camera image, but will display a camera gimbal sensor error on Phantom 3 Standard. Replaced the camera, used the same ribbon cable and no dice at all on being able to calibrate. Then I used a different (OEM) cable purchased from elsewhere and it worked with no errors. I would not suggest this cable, instead try and find a full working gimbal: Genuine DJI Phantom 3 Spare Part #85 .
Niñex
Reviewed in the United States on May 22, 2023
Excelente calidad
george mitchell
Reviewed in the United States on January 4, 2023
Replaces original perfectly with no camera or gimbal issues. You will need patience and dexterity to install and I recommend using good stiff cotton swabs like Q-tips to affix the sticky tape.
Brenda Keeler
Reviewed in the United States on August 12, 2022
It worked as stayed and my dji phantom is back in the air. I watched some YouTube videos for the how to part of replacing it.
Ryan M
Reviewed in the United States on January 9, 2021
After getting a bad batch off ebay I was a little reluctant to try it but needed one fast so I decided to give it a shot. Worked perfect! Buying from these from now on!
Fenton
Reviewed in the United States on October 13, 2020
So it has been a while since i purchased these, but i needed it because my phantom 3 had randomly fell out the sky one day, i fixed it up but accidentally sheered the ribbon cable, bought this and now it works just as if the drone is brand new
David G.
Reviewed in the United States on May 17, 2017
Most likely not the sellers fault but these cables don't work. The video feed doesn't work. I tried two of these and they did the exact same thing. I purchased an original DJI cable and it worked perfectly. I didn't ohm out every run but most likely one isn't complete or is missing all together. The seller sent promptly so I feel bad about giving this such a low rating but the supplier is at fault not the seller.
DNT
Reviewed in the United States on April 3, 2017
This is an ok fit. It didn't always want to slide in to the ZIF connectors and required some force which is usually a really bad idea. If I were to do this again I would probably get the genuine DJI part. However, as far as after market ones go this did the trick. Beware, installation is quite a pain so if you don't have patience and don't have small hands forget it.
Recommended Products
