Your cart is empty.
Your cart is empty.Product Description
Package Contents:
- Pole
- U-Bolt
- Pipe Bracket
- Wall Mounting Bracket
- 4 Expansion Bolts
- 2-Split Washers
- 2-Nut
Strenghtened Pole Mount Bracket
4 strenghtened ribs
Double Screw Fixation
With 2 U-bolts for more durableDouble Screw Fixation, More Stable
alpine
Reviewed in Canada on January 12, 2025
Does what it's suppose to do, bought it for cell phone booster antenna that didn't come with anything to mount it.. looks good and sturdy
Tim
Reviewed in Canada on September 16, 2024
The price
DCJDINMN
Reviewed in the United States on August 6, 2024
Quite a bit of flex with a medium sized TV yagi antenna. You will want to use a longer pipe with additional support for a steadier mount. It is of good quality and should be plenty sufficient for a whip antenna.
SavvyShopper
Reviewed in the United States on August 23, 2024
Perfect to mount my Ambient Weather WS-2000 to my fence.
PJDSR
Reviewed in the United States on June 26, 2024
Living in a Barndo has some downfalls; getting internet wifi through metal walls; the same for radio signals. This worked perfectly to get my antenna just above line-of-sight and cabled into my am/fm radio - what a difference.
Keith
Reviewed in Canada on March 29, 2024
I needed a mounting pole to fasten my Cell phone booster antenna to the side of our house and the XRDS-RF seemed like a fairly simple solution. Assembly is very quick, you only have to attach the mounting plate to the pole using the 2 U-bolts. Once it's together it is a very sturdy mount, the pole itself is a very heavy steel and it is probably overkill for my light plastic booster antenna. The kit also comes with 4 expansion bolts for securing the mount to a wall.I did a dry fit with my antenna to make sure everything fits ok and I am quite pleased with how well this is going to work for my installation.You really can't go wrong with this mount for $30. It comes with everything you need to get your antenna mounted.
T
Reviewed in Canada on November 17, 2024
Mounted to trailer A frame to hold my pirate flag for camping. Lots of questions! Everyone wants one.
Lem
Reviewed in the United States on March 12, 2022
The mounting part of the mounting bracket has four holes. I used lag bolts into stud wood at the peak of the house that I bought at the hardware store for a very solid mount. Since the pole is just about two inches in diameter, the U-brackets provided with my antennas were not wide enough so I went to Lowes and Home Depot and the orange store had the proper width bracket (U-Bolt by EVERBILT #310 on the sticker) .I like that the pole is longer than most, but the bracket needs to be made of thicker steel and the antenna mount should allow for two U-Bolts to mount the antenna (four holes) instead of just for one bracket with the two holes. I initially mounted a 4 dbi antenna, but changed it out to a 30 inch 5.8 dbi antenna, yesterday. There was a bit of sag, but I simply bent it up a tad to compensate and it's fine.My earnings are way up after that swap even as today's 30 to 40 mph winds are shaking the antenna a bit, so the shaking seems to have no effect on the transmit/receive end of it. I'd say the shaking is no more than an inch, back and forth at the antenna tip. I disagree with one reviewer in that I don't think that the shaking in high winds will eventually cause the mounting bracket to fail. You'd have to manually bend the metal back and forth at a high angle to cause this sort of fatigue to failure.
Customer
Reviewed in the United States on March 11, 2022
Easy to assemble and install
Yevgeniy
Reviewed in the United States on November 3, 2022
Good strong
Sharon L.
Reviewed in Canada on December 23, 2021
Used it to mount a cell phone signal booster. Works great and has survived to big wind storms so far.
tylernt
Reviewed in the United States on November 24, 2021
I ordered this because I needed a 2" diameter U-bolt and bracket, and that's what I got, but for some strange reason they also included a 1.5" pole and U-bolt. Not sure if that's normal or if someone made a packing mistake. Anyway, I used this to mount a classic Yagi-style TV antenna that's about 3' long, and the bracket didn't bend or sag under this cantilevered weight.
EMS Chief Kerstetter
Reviewed in the United States on November 7, 2020
It was quick and easy to install and have our cellular booster installed in less than an hour.
Recommended Products