Your cart is empty.
Your cart is empty.Product Description
Yescom 10 Ton Hydraulic Punch Driver Kit Manual Hole Knockout Puncher Tool w/ 6 Dies
Package Content:
- 1x 10-Ton Pump
- 6 Sets of Dies & Punches
- 2x Draw Studs
- 1x Piston Shaft
- 2x Spacers
- 1x Metal Carrying Case
- 1x Manual
Complete Punch Tools
Hydraulic punch tool kit features 1pc 10-ton pump, 2pcs draw studs, 1pc piston shaft, 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2" conduit sizes, can drill different sizes holes on stainless steel, iron, steel, aluminum, plastic, etc
1/8” (11 gauge) max punching thickness for iron and 1/16” (16 gauge) for stainless steel, perfect to be used for different drilling projects
Efficient Hydraulic Design
- Hydraulic pump features 10T pressure for providing fast punching speed
- Pump with pressure hose for adjusting the angle of the ram flexibly
Sturdy Steel Construction
- 40Cr steel dies and steel pump body for ensuring high strength, sturdiness and durability
- Stable construction is suitable for heavy-duty and frequent punching works
Convenient Operation
- Rotatable "on/off" knob for quick releasing pressure after drilling holes
- Anti-skid plastic grip at the end of the handle for easy and comfortable pressing
Portable & Wide Application
- Metal case with handle and double metal locks for convenient and safe storage
- Widely used on installing and repairing wire pipeline, signal lamp and instrument on construction sites, etc.
Customer
Reviewed in the United States on December 23, 2022
This needs to be standard in any electrician's van. Unless you like burning up expensive bimetal holesaws and making unclean cuts with tons of collateral scraping. My panel changes now directly bolt up to old service holes because this makes the hole exactly where I need it. It is exact, so there isn't much slack for adjustment. I primarily cut out 2" holes but have also used it for 1.5" holes as well. The design is competent, durable, and well made. The hole cuts clean and releases clean. No struggling to release the cookie. I chucked the garbage standard metal case (with its deceptive latches that don't latch) it comes with as fast and far as I could and store the tool in a tool bag with the bits inside a durable zipper container for optimal organization. Indispensable tool even if it wears out quickly.
Customer
Reviewed in Canada on January 5, 2020
Junk, terrible seller. Missing the small rod. Can't use the 1/2" die. Threads are very poor. Need to use hand tools just the thread in the die. Case with Styrofoam. Seller only issued a partial refund to send back their defective item. Seller just denied their is a problem, I'm electrician, I know how to use this, and this product is just not useable, save your money.
Customer
Reviewed in Canada on July 31, 2019
Great price, works great, but I did a slight modification.I put a quick disconnect hydraulic coupler for ease of storage.Love it more. Much happier.
Paul sodhi
Reviewed in Canada on December 25, 2019
The product itself is excellent but the box is not because the hydrolic pump doesn’t fit properly and the no place to organize the parts but for the price I paid and the performance is excellent overall no problem recommend you to buy this product
Veillette
Reviewed in Canada on November 22, 2019
très bien merci
adam
Reviewed in the United States on October 8, 2018
This item works good! I imagine if I was knocking out holes all the time I might need a more expensive brand but this one works great!
Customer
Reviewed in the United States on June 5, 2017
I side the case is just cheap styrofoam, which came broken. So expect the tool to just tool around in the case and get smashed up. Good price tho, so perhaps I'll make a tray for it and live with it.
Customer
Reviewed in Canada on April 30, 2016
Haven't put it to the test yet but it should fit the purpose for which I purchased it for
Jack Chism
Reviewed in the United States on May 9, 2015
Worked great - once! Not sure what happened. I was punching some VERY thin metal building siding. No issues - clean, easy cut. Went to use it again on a mild steel panel... wouldn't pull the cutter thru. It acts like the hydraulic fluid is leaking by somewhere internally. It just won't develop any pressure any more. As for the punch set, they seem great. Too bad I can't use the hydraulic drive! Bummer!
HotRod_Horror
Reviewed in the United States on May 21, 2015
I'm always skeptical of these cheap Chinese tools, but at less than 10% of the cost of a Greenlee punch set, I thought I'd give it a try. When I pulled out the instruction manual I got a bit nervous. Firstly, it calls the tool a "hydraulic hole digger" and the rest of the "manual" (if you can call a single small sheet of folded paper a manual) is written in horrible, nonsensical "Chinglish" and doesn't actually tell you how to use the tool.However, upon looking at the dies and the tool, they appeared to be of decent quality. The metal case is fairly decent, but the styrofoam insert that holds the parts in place kind of sucks. I just pulled it out and tossed it.My first use of this tool was to make a hole in a 15 gauge stainless steel box. I was enlarging an existing hole, so I didn't need to make a pilot hole. However, if you do, you'll need a 7/16" or 11mm hole for the 1/2" and 3/4" K.O. dies and a 13/16" or 20mm hole for the 1", 1-1/4", 1-1/2", and 2" K.O. dies. I assembled the die set on the tool and a couple pumps of the handle later, the die went right through like it was nothing!I've only used the tool for one hole, so I can't really comment on the longevity of the tool. If something should happen, I'll update my review. It should also be noted that this set includes a set of o-rings to rebuild the hydraulic part.
Adam
Reviewed in the United States on March 22, 2015
Excellent value. I would have to spend ten times as much to get a name brand knockout kit. This set has it all. I threw away the Styrofoam inside the case and built wood trays to hold the dies.
harold sundberg
Reviewed in the United States on March 18, 2015
A good tool, works as well as a greenlee, but not as expensive!
KEVIN
Reviewed in the United States on February 5, 2015
When I first bought this product I was skeptical. Not anymore. I've been using it for a month now. It is great. Hydraulics are tight and cutting dyes are still sharp and crisp. I have cut about 500 holes on panels and metal building purlins and no problem. For the money, u can't beat this product. Kevin
Recommended Products
$44.95
$ 19 .99 $19.99
$54.99
$ 27 .99 $27.99