Your cart is empty.
Your cart is empty.Product Description
* Light stand is not provided.
Installing the Adapter
- Align the end of the adapter with the 1/4" screw on top of the light stand.
- Install the adapter to the light stand and tighten the adapter screw.
Align the adapter mount with the ZHIYUN MOLUS G60 accessory mount, install the adapter to the G60 and rotate the adapter clockwise until you hear a click sound.
- Align the standard reflector mount with the adapter mount and install the standard reflector to the adapter.
- Turn the standard reflector counterclockwise until the reflector is engaged in the adapter and cannot be turned.
You can adjust the adapter angle if necessary and tighten the adapter latch.
Removing the Adapter
- Press and hold in toward the right of the orange lock at the top of the adapter and turn the standard reflector as shown in the image.
- Remove the reflector from the adapter.
Loosen the adapter screw and remove the adapter from the light stand.
- Press and hold the lock at the gap of the adapter as shown in the image while turning ZHIYUN MOLUS G60 clockwise.
- Remove the adapter from G60.
PH
Reviewed in the United Kingdom on February 29, 2024
This is a decent adapter that allows me to use my Bowens light modifiers with the Molus and Cinepeep lights I have. It fits very snug to the lights and to the light stand and is well made. Ill be getting a second one shortly.
Zack
Reviewed in the United Kingdom on April 23, 2024
The baby pin screw uses a thread insert glued into plastic. The plastic cracked on the first day using it with a beauty dish, and the thread insert fell out completely, making the entire thing unusable.
Recommended Products