Shopping Cart

Your cart is empty.

Your cart is empty.

ZORZA 1Pcs Motor Pinion Gear Puller Remover Tools Set for Rc Tool Motor Pinion Accessory Gear Puller Tool

4.5 (4) Write Review
Free shipping on orders over $29.99

$8.59

$ 3 .99 $3.99

In Stock

About this item

  • Made of Quality Metal: This pinion gear puller is constructed with high-quality metal, ensuring durability and longevity.
  • Versatile Tool: Designed for pulling pinion gears off small and medium-sized motors with an outer diameter of up to 11mm and a tooth height of 12mm or less,this gear puller is suitable for various applications.
  • Convenient Sliding Plate: The gear puller's sliding plate features two ends of different thickness, making it easier to insert into the gap between the pinion gears and the motor's top.
  • Five Pin Options: This gear puller set includes five pins, each designed for pulling pinion gears of different sizes. Choose from circular head pins with 0.9mm, 1.75mm, and 1.9mm diameters, or semicircular head pins with 1.75mm and 2.8mm diameters.
  • Cost-Effective Solution: Before investing in a new motor, consider replacing the pinion gears first with the help of this gear puller. This pinion gear removal tool can save you money and ensure the smooth operation of your RC helicopter or other motorized devices.


Note:
Motors of 550 or 5 series or above that are particularly tight do not support remove, otherwise the remover tool will deform. Thank you!
Instructions:
1. Select the appropriate needle based on the motor shaft diameter. Do not use a needle that is too small with a motor shaft that has a larger diameter, as this may cause the needle to break. If the gear has adhesive, it should be heated first to melt the adhesive before removing the gears. >
2. Choose the desired tooth puller needle and install it onto the tooth puller rotating rod. Tighten the screw (Note: for needles with a platform, the screw should not be tightened too much). >
3. Attach the tooth puller rotating rod to the tooth puller bracket. >
4. Install the tooth puller movable plate. >
5. Mount the motor onto the tooth puller movable plate, aligning the motor shaft with the tooth puller needle. >
6. Rotate the tooth puller rotating rod clockwise at a constant speed to pull out the motor gear. >
7. You can remove gears with a maximum outer diameter of 11mm and a tooth height of up to 12mm. >
>


Customer
Reviewed in the United States on May 10, 2024
I bought this, because Sam of Sam's Trains said he liked it. I had no use for it at the time, but have several gear pullers of all types, very large and small, and foresaw needing this one, now my smallest.I was right, and I had to take a gear off an HO train truck to get it out of the engine. It's a little different, but it worked. If it was made in the traditional way, it might not of fitted under the gear I had to pull. Worth the money I paid.
Customer
Reviewed in the United States on February 24, 2024
I wish I have read the previous review before ordering it. The metal bent at the slightest pressure and the gear didn’t even budge.
Chris
Reviewed in the United States on February 23, 2024
The steel is very soft, so the pin bent and the gear didn't budge. I was able to straighten the pin since it's soft steel.This tool is only useful for plastic gears.
Chris
Reviewed in the United States on April 1, 2024
I tried this as a simple way to remove a gear from a small electric motor. It immediately broke. The parts are too weak to handle any force. Complete waste of money.