Your cart is empty.
Your cart is empty.For quality and convenience, it's hard to beat a well thought out pre-assembled passive crossover network. Based on textbook-correct filter formulas and constructed expertly from top-quality components, these crossovers are a fast and easy way to get your loudspeaker system up and running.. Configurations include 2-way, 3-way, high pass, low pass, and subwoofer.
Raymond Barbieri
Reviewed in the United States on December 11, 2023
The reason for my three stars is that there was a manufacturing problem with one of the two that I purchased. Luckily I discovered this before I finished closing up the enclosure. The cold solder joints were on two of the blade connectors for connecting to the speakers. I had to remove the bottom wood plate to expose the solder to reconnect the solder. I discovered this as I pulled the connector off, the whole blade came with it. I was able to resolder and they're working great now.So I would still recommend these however check the devices to see if they are soldered properly before you completely enclose the speaker.
dennisnv
Reviewed in the United States on April 19, 2020
Used this to deploy two tweeters in conjunction with a twelve-inch driver for an FRFR guitar amp build. It was easy to mount and connect. Works good, no heat, no problems so far ...
Rafael Arancibia
Reviewed in the United States on May 31, 2019
Good product....good frecuency response... The only thing I complaint is that there is not diagram or schematics about this device.. also, the pcb is covered so you cannot see the layout (my interesting about that is to check how the impedance is changed by the switch)
Tiz
Reviewed in the United States on August 2, 2016
Build my own speakers with it. The components used seem of good quality. One star off because on one of the 2 crossovers I ordered, I had to solder 2 pins that were loose, 1 of the 2 fell off when tried to insert the female connector.
Customer
Reviewed in the United States on May 5, 2016
Very satisfied
Recommended Products
