Your cart is empty.
Your cart is empty.Keep interior wood projects looking beautiful with Minwax Oil-Modified Polyurethane Wood Finish. The water-based clear top coat combines superior durability with the beauty of traditional polyurethane. It adds long-lasting beauty and protection to interior wood surfaces including woodwork, furniture, doors, cabinets and floors. Plus, you can get more done with this protective poly coating. It’s an ultra fast-drying clear coat that allows for quick recoats in 2 hours, and because it’s water-based, it has a low odor and easy cleanup with warm water. It can be used on both finished and unfinished wood projects, and is available in a variety of sheens. Application Directions:
1. Surface must be dry and free of old finishes in poor condition, paint, wax, grease, polish, dirt or other foreign matter.
2. Sand to obtain a smooth, uniform surface. Do not use steel wool. Remove all sanding dust. Thoroughly wipe clean with a damp cloth. Allow to dry completely.
3. If desired, apply Minwax stain to unfinished wood surfaces. Follow directions for application and dry times. Wait 8 hours after staining, before applying Oil-Modified Polyurethane.
4. Stir Oil-Modified Polyurethane before and during use to eliminate settling on the bottom of the can. Stir to rotate the product from the bottom to the top of the can. NEVER SHAKE.
5. Apply a THIN coat of Oil-Modified Polyurethane using a high quality synthetic bristle or foam brush.
6. Let dry 2 hours. Then lightly sand entire surface with fine sandpaper (220 grit) to ensure an even finish and proper adhesion. Remove all dust.
7. Apply a second coat. Oil-Modified Polyurethane requires a third coat; repeat step 6 before application.
8. After final coat, allow 24 hours before light use.
Rene Hollander
Reviewed in the United States on March 17, 2025
Great product! Easy to apply, dries quickly, redcoat in 2 hours, very hard durable finish, easy water clean up!
Dan H
Reviewed in the United States on March 10, 2025
This stuff does not bring out the grain like oil base urethanes. Makes the wood look like it’s painted. For me a waste of $.
Ron
Reviewed in the United States on July 7, 2024
It worked good
William J Miller
Reviewed in the United States on July 10, 2024
Horse s stall front s
Lisa
Reviewed in the United States on August 15, 2023
As a novice I used this product for the first time and the finish was stunning
Allnightfilm
Reviewed in the United States on August 22, 2020
It might be that I used it on a cork floor that it came out with streaks. And I didn't sand in between coats so it could be that. I had used this on chairs and it was amazingly easy and cleaned up easy. So I think it's a good polyurethane. I used lambs wool applicator but couldn't stop even the first coat from laying down with streaks. Maybe if I had sanded. But when it's done and cured for the correct time it's a solid finish like I wanted and very shiny. So if you want to use it on your floors get the stick with the lambs wool applicator and in between coats you can just put a piece of Sand Paper on the same block while you wash the lambs wool or change to a new one and do the light sanding to see if it smooths our the streaks.
Robert Terry
Reviewed in the United States on August 21, 2020
I like the ease of use and easy clean up.easy
mawillis
Reviewed in the United States on November 7, 2019
I've used this for years. Water based so it can be used indoors without venting. Very durable
Recommended Products
