Your cart is empty.
Your cart is empty. Module Highlights：
1. It adopts imported dual MOS parallel active output, with lower internal resistance, large current and strong power. It is 15A and 400W at normal temperature, which satisfies the use of most equipments;
2. Wide voltage, support PWM;
3. Easily control the high-power equipment.
Product parameters:
1: Working voltage: DC5V--36V
2: Trigger signal source: digital high and low level (DC3.3V--20V),It can be connected to MCU O port, PLC interface, DC power supply, etc., can be connected to PWM signal, signal frequency 0--20KHz support
3: Output capability: DC DC5V--36V,At room temperature, the continuous current is 15A, and the power is 400W! Under the condition of auxiliary heat dissipation, the maximum current can reach 30A
4:Service life: unlimited switch; working temperature: -40-85 ℃
5:Size: 33x17mm/1.29x0.66in(LXW)
Package includes:
10 x PWM Adjustment Electronic Switch Control Board
Charles J.
Reviewed in the United States on October 3, 2024
I have utilized several of these on a couple of different projects. Seems to handle current just fine. There are a couple of things to know.I have ended up adding screw terminals on the input, just to make them a little easier. I'm not sure why they would have screw terminals on one end and not the other, but standard 5.00 or 5.08 terminals work fine. Also, the positive terminal is not switched. If you look at the trace on the back of the board, it is obvious the positive side is continuous. It is the negative that is being switched. While this may not seem to be much of an issue, it can be if you are using multiple of these on a single project which share a common ground. You may ended up switching multiple devices when any one device is switched "on".
Recommended Products
