Your cart is empty.
Your cart is empty.
Description
Application
- Widely used in Gear shaft, motor shaft, short support shaft, shaft pocket model, miniature axle, model plane, model ship, model cars
Feature
- Strong rust-resistant and corrosion-resistant, sturdy and durable
- The surface is smooth, easy to shape, no cracks formed
Specification
Material: 304 stainless steel
Color: silver tone
Diameter: 1mm/ 3/64 inch
Length: 150mm/5.9 inch
Packing details: 5pcs x stainless steel round rod
Note:
Please allow 1-5mm(Length) error due to manual measurement.
Retired in Leeds
Reviewed in the United States on July 8, 2023
Cutting a length of rod and dressing the ends should not be very difficult.For this vendor the process is too much of a challenge.Expect large burrs on both ends.
Mister Fixit
Reviewed in the United States on January 10, 2023
I purchased these to use in designing a tool to align some very small parts. Some of them were bent in shipping which limited their usefulness but I did get enough straight material in the lot to finish the task at hand.
Hermit Dave
Reviewed in the United States on September 1, 2022
Nice quality. Pleased with purchase.
Richard J.
Reviewed in the United States on January 13, 2022
I usually do not write a review but these are so bad the user needs to be informed. First, they are not straight something you require from a drill rod. Second the ends were just clipped off and not cut as you would expect and the not finished. My application was using these as guide pins and I was out of time so I took them to the grinder to finish. Never again from this vender as they are pure crap IMHO.
Poc Network // Tech
Reviewed in the United States on July 3, 2021
There isn't really much to be said about these. They are steel rods. They can be used as steel rods can be used. So we will explain how we used them.We took these to a miter saw and cut them down to size. We then 3D printed some parts to form trays and track pieces. These were used to create the height between the printed trays. Everything was installed into a cabinet and the trays slide in and out, holding spices and stuff in the break area. Cool? We think so. Did the steel rods work? Yes.
A D G
Reviewed in the United States on July 12, 2021
Good quality steel for making small pins for small projects.Cut easily with a dremel.Good and straight (as much as is reasonable for small diameters) and a consistent diameter throughout their lengths.
beebusby
Reviewed in the United States on December 18, 2021
I bought these to use in jewelry making. I use them to make sure my beads are aligned and not rolling everywhere. It make’s designing jewelry bracelets a lot easier. The ends might have a burr on them just file it down and use plastic earring backs on the ends for stoppers.
MrGreenJeans
Reviewed in the United States on December 13, 2021
These 3mm shafts are just slightly over 3mm. 3.005-3.006mm to be precise. Also, they are cut with a shear, so the ends are significantly deformed for use with a bearing such as these: oversizehttps://www.amazon.com/gp/product/B07RN5139M/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 That said, there are plenty of 'hobby' uses, which don't require ball bearings. It's my fault though, I should have bought precision ground material which is toleranced typically +0/-0.01 or whatever. You will need to clean up the end cuts and reduce the diameter a small amount to use with bearings.
Recommended Products
