Your cart is empty.
Your cart is empty.The GC008 X-Connect XL Eyelet Terminal Accessory is compatible with G750, G1100, G3500, G7200, and G4 chargers, as well as GENIUS1, GENIUS2, GENIUS2X2, GENIUS2X4, GENIUS5, and GENIUS10. It features a lie-flat design for seamless installations with an M10 hole size. Not compatible with NOCO Boost or Boost X UltraSafe Lithium Jump Starters.
Roberto
Reviewed in the United States on March 29, 2025
I have a few chargers that use this type of connector and routinely find myself reusing the same battery cable. These worked perfectly and allow me to leave them mounted on different batteries as needed.
Guy Bridger
Reviewed in Canada on March 2, 2025
Great if you wanted eyelets instead of clamps or if you needed to charge something you can then use clamps and leave eyelets on your batteries while charging something else. Awesome
Kindle Customer
Reviewed in the United States on March 14, 2025
Used for lithium motorcycle charging and maintenance. Does it's job.
millerized
Reviewed in the United States on February 9, 2025
Thanks to aftermarket, these NOCO's are making "no start Monday's" a thing of the past. Always have a fully charged battery on ALL of your machines. From the snowblower through your garage queen 1953 Ford Pickup, these make switching one charger between all your toys a very simple matter. Install them once, and switch with ease.
txman201
Reviewed in the United States on February 11, 2025
Overall quality is average. Ring terminal material is a bit thinner than I would like & lacks tin plating, but product is functional.
PS
Reviewed in the United States on January 28, 2025
These connects seem equal to the overpriced NOCO brand interconnects. The gauge or thickness of the wires is the same as the NOCO brand, and the mating of the NOCO brand male connector to the female connector of this product seems just as tight as the NOCO female to NOCO male connection. The NOCO brand dust caps are made of a somewhat soft-touch material while this product the plastic is plain plastic. I've had a few NOCO brand dust covers break along the leash strap that secures the cover to the dual wires, so looking forward to seeing if the generic plastic leashes are more durable. These include 4 total 20 amp fuses, 2 preinstalled and 2 spare fuses.
James Evans
Reviewed in the United States on January 26, 2025
I have a few NOCO chargers that I use to keep equipment charged when I'm not using it for a while, such as my motorcycle during the winter time. It is nice to be able to move the charger around to different vehicles if you have additional harnesses to connect to the batteries. This 2-pack of harnesses are great for that, but keep in mind that these are the large lug versions. I didn't take that into account, and the lug holes are too large for one of the applications that I had in mind, unless I use washers. They click in just fine with my NOCO charger and don't have problems connecting or disconnecting.
Raymond J Johnson
Reviewed in the United States on January 24, 2025
Correct product used to expand current use of previous battery tenders
Archer
Reviewed in the United States on January 12, 2025
The M10 (3/8in.) XL Eyelet Terminal Wire Harness Trickle Charger Cable consists of two 16AWG wires rated at 300 volts and has a 20amp blade fuse installed in the positive wire that can be removed and replaced if blown. The wire harness length is approximately 21-3/4 in. or 55.2cm, not including the brass eyelet terminals.I installed it on my truck’s battery cable clamps at the tension bolt by tightening an extra 11mm nut over a galvanized steel washer, the M10 eyelet in between, and another galvanized steel washer on each tension bolt. I tucked the wire harness towards the side edge of the engine compartment and zip tied it secure. Then I had just had to press the red button down to pull my X-clips wire harness connector out of the socket, depress the red button again and insert the M10 XL Eyelet Terminal Wire Harness plug into the socket.This wire harness was an exact OEM fit with my NOCO GENIUS 1 battery charger and maintainer. My NOCO GENIUS 1’s red light appeared soon after connecting the AC 120V power supply signaling that trickle charging had begun. Later I checked on the charging light several times and it was still going strong.I am so glad now that I just have to make a wire connection to charge my truck’s battery, instead of using the X-clamps which require clearance above the battery requiring that the engine compartment hood has to be slightly raised. Now I can charge my battery under pouring rain with the hood closed by running the power extension cord from underneath the engine compartment at the front wheel thanks to this new M10 Wire Harness for NOCO battery chargers by FZSFVAQ.
Recommended Products
