MC4 adapter for BLUETTI AC200L, EF ECOFLOW RIVER 2, BLUETTI AC50B

XT60 adapter for EF ECOFLOW RIVER Pro 720Wh/DELTA 1260Wh/Anker 757 PowerHouse 1229Wh

Anderson adapter for Jackery Explorer 1000,ROCKPALS 300W,Ecoflow

DC5521 adapter for Rockpals 250W/350W/500W, FlashFish 200W/300W,PAXCESS ROCKMAN 200W/300W/500W, PRYMAX 300W

DC7909 adapter for Jackery Explorer 300/500/1000/1500,Goal Zero Yeti 160/240/300, Anker 521 Power Station, BLUTTI EB 240,GRECELL 300W/500W/1000W

DC8020 adapter for Jackery Explorer 1000 v2/600 Plus/880 Plus/1000 Pro/1000 Plus/1500 Pro/2000 Pro/2000 Plus/3000 Pro

SAE adapter for lead-acid batteries

Meanwhile,there is a complimentary 4 in 1 DC adapter DC5521(Female) to DC5525/5521/35135/909/8020(Male) to expand the folding solar panel's compatibility.

The USB-A port(5V/3A,9V/2A,12V/1.5A) and TYPE-C port(5V/3A,9V/3A,12V/3A,15V/3A,20V/3A) are fast charging,allowing you to efficiently recharge multiple USB devices while enjoying your outdoor activities.

You can also extend the functionality of our 200 watt portable solar panel with additional accessories, including a charge controller cable, a MPPT or PWM solar charge controller, and a charge controller to Alligator clip cable. These accessories allow you to connect the foldable solar panel 200w to provide continuous power for 12V batteries, including AGM, LiFePo4, lead-acid, gel, lithium, and deep cycle batteries commonly used in cars, boats, ships, trailers, and RVs.No matter where your adventures take you, LUVKNIT 200W Solar Panel is here to solve all your outdoor charging problems.Kindly be noted the MPPT/ PWM solar charge controller and alligator clip cable are not included,you need to buy them separately.

• How much power can the SOLUPUP 200W Solar Panel generate under normal conditions?
• This depends first and foremost on weather conditions. Generally speaking, on a clear day with no clouds in the sky, sunlight hitting the panel at a 90° angle usually generates 160W–180W of power in the 200W panel. (Current light conditions are normally 800W–900W/m2 (74.3W–83.6W/ft2) with a panel temperature of 50°C (122°F) under test conditions. Nominal power ratings are based on 1000W/m2 (92.9W/ft2) in AM1.5 conditions with a panel temperature of 25°C (77°F) under test conditions. Power output figures close nominal values were normally observed in the midday sun during the winter.)
• What should I know about the operating temperature, storage and use o f the SOLUPUP 200W Solar Panel?
• The operating temperature of the SOLUPUP Solar Panel is -25°C–65°C (-14°F–149°F). The solar panel weighs 8.2kg (about 18.5 lb), with a folded size of 24.4*20.8*1.9 inches and an unfolded size of 91.5*20.8*0.6 inches. It is easy to carry and suitable for off-grid adventures. The solar panels need to be folded up when not in use, which provides sufficient protection for the product. To extend the service life of the panel, ensure that the product is not exposed to external forces/impacts when not in use. The solar panel itself is made of glass and must not be dropped, pierced, bent, or sat on. These actions may break the glass and render the panel unusable.
• Can l use other branded power stations with the 200W SOLUPUP Solar Panel?
• Yes, the 200W foldable solar panel uses MC4 cable for output, and is also equipped with MC4 to Anderson DC and XT60 cables, which is compatible with most power stations. Under adequate sunshine, the 500wh power station is fully charged by SOLUPUP 200W solar panel within 4 hours.
• Can 200W solar panels be connected in parallel or in series?
• Yes，when the solar panels are connected in series (+ connected to -, + connected to-), the voltage is added, the power box in the accessory cannot be used for series connection. It can only be connected to the RV system and home storage solar system. Pay attention to the voltage when connecting other equipment, or you can add an MTTP controller or voltage reducer to use together.; when the solar panels are connected in parallel (+ connected to +,-connected to -), the current is added.
• Does the 200W SOLUPUP Portable Solar Panel generate a full 200W of power?
• In most cases, it is normal for a solar panel not to deliver its full nominal power. Some of the reasons why this happens, as well as some suggestions for getting closer to the nominal power figure, are given below. 1. Light Intensity. The amount of light shining on the panel will result in fluctuations to the power output. You are more likely to achieve nominal power output figures closer to those obtained under test conditions when using the product on a clear day during the midday sun, than when using the product in the morning or later in the afternoon. Weather conditions will also affect the amount of sunlight that shines on the panel. For example, you are much less likely to achieve the figures for nominal power in hazy, cloudy or rainy conditions. 2. Surface Temperature. The temperature of the solar panel surface will also affect the amount of power generated. The lower the surface temperature of the panel, the more power will be produced. For example, solar panels generate more power when used during the winter than during the summer, and this is completely normal. Solar panels generally reach temperatures close to 60°C (140°F) during summer. This reduces nominal power by 13%, despite the higher levels of light shining on the panel. 3. Sunlight Angle. In optimal light conditions, the sun's rays should remain perpendicular to the surface of the panel for best performance. Power output is only marginally impacted by sunlight hitting the panel within 10° either side this 90° angle. 4. Panel Shading. The surface of the solar panel should not be shaded during use. Shading caused by shadows, foreign objects and glass can all greatly reduce power output. Performance Issues Caused by Malfunctioning Panels: If the panel still isn't generating power or its output remains far below expected nominal power figures after addressing the issues above, there may be an issue with the panel itself. Please contact Customer Support for assistance.