Your cart is empty.
Your cart is empty.Product Description
XINGYHENG 20pcs PCB Print Circuit Board Carbide Tungsten Steel Micro Drill Bits Set Shank 0.10mm to 1.0mm and 1.1mm to 2.0mm (1 Each)
Size and quantity：
- Diameter:
- 0.1-1mm: 0.1mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm ( 1pcs for each Value )
- 1.1-2.0mm: 1.1mm, 1.2mm, 1.3mm, 1.4mm, 1.5mm, 1.6mm, 1.7mm, 1.8mm, 1.9mm, 2.0mm ( 1pcs for each Value )
- Packing: 20pcs ( 1pcs for each Value ) 2 x Plastic boxes
High quality
Carbide rods and tungsten steel rods, with high hardness, high wear resistance, high strength, resistance to bending, anti-impairment and long tool life
Good quality
Large drill bit chip space, chip resistance,Chip smooth, small drilling heat, reduce smear. Drill has a large scraps discharge space,little resistance and smoothly during the scraps discharge.
Premium material
Using high quality materials and fine grinding process makes bit more sharp cutting edge,reduce cutting force and broken drill and improve the quality of hole wall. Cutting edge strictly symmetrical: beneficial and efficient cutting, avoid offset drilling.
Enjoy making your crafts!
Paar
Reviewed in Germany on February 18, 2025
Ich benutze sie in einer 3018 cnc fräse und nur für PCP Platten, was soll ich sagen... Sie machen Löcher. Sehr Umfangreich und gut verarbeitet.
Mark Rios
Reviewed in the United States on March 3, 2024
The only complaint is that they are on the fragile side. So, go easy with them.
Ed Moreau
Reviewed in the United States on October 4, 2024
Drills are delicate. They work but need to be very gentle when using them. Broke two slready.
Jose
Reviewed in the United States on January 16, 2024
Súper necesarias
BJL
Reviewed in the United States on May 23, 2023
Was using one of the smaller bits to enlarge a hole in fairly soft plastic when the bit snapped in half. I would not purchase this product again.
Thomas Modellbauten
Reviewed in Germany on March 1, 2023
Habe das Set gestern erhalten. Leider sind die für meinen Maßstab (1/87) entscheidenen Bohrer 0,1;0,2 sowie 0,3 mm schon abgebrochen in die Box gesteckt worden; die abgebrochen Teile waren jedenfalls nicht in der Box. Die restlichen Bohrer sehen solide aus und werden die Tage mal getestet
Patrice B.
Reviewed in Canada on December 8, 2023
I bought it to drill small holes in plastic (miniature figures). Drills quite well, without effort. You don't need to apply a lot of pressure, which is good for small parts.For best results, I recommend using it with a mini hand drill.All shanks measure 3mm in diameter.
neil bridges
Reviewed in the United Kingdom on December 25, 2022
Having been disappointed with so many types of micro drills (blunt, snapping etc) I am really pleased with these, very sharp & sturdy!
Ash
Reviewed in the United Kingdom on April 20, 2022
I’ve had various drill bits over my hobby years but these are the best ones I’ve had! They fit snugly into most drill handles, though I would advise to check yours can take 3.2mm chucks. They drill so effortlessly which is great when i’m sitting and magnetising a whole bunch of arms or drilling barrels!I mainly use the 1.2mm through to the 1.6mm bits.The ones under 1mm you will have to be very careful as while they are carbide steel, the slightest excessive movement could snap the bits. The ones above 1mm look a lot sturdier but still be careful!Each bit is colour coded and you can faintly see the size etched onto the metal. The case they come in also folds out slightly so you can stand it in your hobby space while you work.Solid purchase for anyone who drills tiny holes for barrels and smaller arms.
djshoe72
Reviewed in the United States on February 9, 2021
Using these for miniature gaming. Love the easy swapping of bits.
Graeme Thomas
Reviewed in the United States on February 28, 2020
Perfect. Exactly what I needed. But be careful they are very fine and easily broken if too much force is used.
Always Looking for the Truth
Reviewed in the United States on October 13, 2018
Very often, in our industry, we need to drill tiny holes in different materials. I have used these carefully, and find that they do a great job! Like many tiny drill bits, they WILL break if you exert too much pressure on them, or twist them to the side when you are drilling. If you are cautious, they will last a long time and get the job done.
ME
Reviewed in the United States on June 26, 2017
Work great and great price,1st time using them, works great with dremel stand. Will order more and 0.10mm to 0.2mm bits are very fragile so take your time handling them.
Recommended Products