Your cart is empty.
Your cart is empty.The Dual Zone ATV Clamp-On Heated Grip kit was designed to keep your hands and thumbs warm while riding or working in cold weather, with an easy-to-install grip and thumb warmer. Our innovative design let's you independently control the amount of heat you desire for the grips and thumb warmer with the Dual Zone controller. The control unit has multiple mounting options, adjustable LEDs for day or night operation and will shut off automatically after two hours to save your battery life.
Cote
Reviewed in Canada on March 19, 2025
Excellent
Big John
Reviewed in the United States on August 12, 2024
New improved grips much better than the old onesHas screw to tightenNo more gluing them on
aaron fischer
Reviewed in the United States on July 23, 2024
This worked perfectly on my suzuki eiger. I ice fish so I'm traveling across open windy areas and no problem. You have to hit select for the hands and set temp level then hit select again for thumb then you can set that temp. Do not try to ground the wiring to the handlebars it won't work. You must run a ground to the battery.
Mike
Reviewed in Canada on February 1, 2024
Grips were very easy to install on my Yamaha Grizzly. Unfortunately the controller was not working properly and I had to return the grips for a refund. Quick and easy return and I purchased another identical set from a different supplier. These work great, very satisfied.
Mrs. Kim Goudey
Reviewed in Canada on October 1, 2023
These heaters fit perfectly and are well made. The install is very straightforward and they heat up very quickly. These certainly should fix my cold hands when plowing this winter
Gery J. Allan
Reviewed in the United States on November 18, 2022
These are great. The only issue I had to figure out was out was how to wire the grips to a hot lead on my Honda Rancher ATV (2016). But, I found a youtube video that showed me where it was. Very easy to do once I found it. One other issue was how to attach the controller. The kit comes with a bolt that you can use, but there was no place on my handle bars for the bolt. So, Instead, I bolted it to my side view mirror, using the bottom bolt for the clamp that attaches to the handle bars (see pic). Very happy with the way this turned out and the grips are super warm for winter riding
Island Guy
Reviewed in Canada on March 14, 2021
This is the second pair I’ve purchased. I’ve had mine on my Yamaha grizzly for three years with zero issues. I bought a second pair for my father-in-law’s kingquad. Easy install, and I like the adjustable heat levels. Also like that you have the option of bright or dim lights on the controller for night/day. Good product in my opinion.
Flatlander59
Reviewed in the United States on October 17, 2021
I installed it on my new Yamaha Kodiak and was easy to install. I'm sure it has to do with where the throttle control is installed but my thumb reach seems to be a bit further than with the stock grips. I may see how difficult it would be to move that assembly further out so my reach is more comfortable. The grips and thumb heat work great. Am anxious to see this winter when ice fishing how it all works.
Gary A. Stroh
Reviewed in the United States on November 23, 2020
Mounted these on my 2008 Honda Foreman ATV. I can’t believe it took me so long to upgrade. So far have used once to plow snow and for several beach rides at temps as low as 10 degrees F. Warm hands make all the difference in the world.Installation took about an hour. Didn’t like the look of the supplied bracket so I did a custom install of the controller- cut away a small part of the dash and semi-flush mounted it, securing from behind the panel.Lead wires not long enough to complete install, plan on using some of your own. Added an in line fuse for safety.All in all very happy with this purchase. Would recommend.
mike13
Reviewed in Canada on October 24, 2020
Easy to install. The ground wire for the battery connection is to short, It would be nice if they supplied shrink wrap ,for the scotch lock.I tested the warmers out at -6 Celcius, keeps my hands and thumb nice and warm, easy to adjust temperature settings. I would recommend to any atv, operating in the colder climates.
Wade
Reviewed in the United States on December 23, 2019
I just installed these on another 4 wheeler and will never use another brand. Warm up fast and turn right back on the same setting as whenntheybwere turned off. Almost to hot on the hottest setting but it's good to know there is more heat available if you ever need it. Very high quality and easy to install.
Wizard124
Reviewed in the United States on January 17, 2016
Installed these on a Brute Force 750 and the results are better than I thought. They definitely keep your hands and throttle thumb nice and toasty during cold rides. The thumb warmer can get pretty hot so make sure to adjust it to your needs. The installation is fairly simple as long as you have some basic tools. If you're unsure of the proper wires to splice into check your owners manual. You want to splice into a power accessory wire (one which is only live when your key is turned to the "ON" position for your vehicle). I used the positive wire that leads to the auxiliary outlet since I knew that was only live when the key was turned to the "ON" position. I also used several pieces of heat shrink tubing to cover the included splice connectors. This will ensure that the connections are protected from the elements and will not corrode over time. Overall I am very happy and my hands are exceptionally happy. This is definitely a great product.
Customer
Reviewed in the United States on April 6, 2016
Saved my fingers this winter! A must have for fall, winter, and spring riders. I did have to re solder the positive wire back onto the thumbpad heating element. Handgrips clamp on and are very secure, 1500 riding miles and the grips show no signs of wear yet, good rubber compound.
Recommended Products
