Your cart is empty.
Your cart is empty.22-20 Ga. Female Metri-Pack Terminals, GT 150 Series, Sealed 12191818 Metri-Pack terminals are different from Weather-Pack terminals in that the male terminals have flat pins, similar to a quick disconnect, rather than Weather-Pack's round pins._x000D_ _x000D_ Easily determine the Metri-Pack series by measuring the width of the flat pin. Metri-Pack 150 series = 1.5 mm pin width. Metri-Pack 280 = 2.8 mm pin width. Metri-Pack 480 = 4.8 mm pin width. Metri-Pack 630 = 6.3 mm pin width._x000D_ _x000D_ These sealed terminals require a seal for each terminal and sealed housings._x000D_ _x000D_ Terminals require two crimps (terminal to wire strands, terminal to seal to wire insulation). A proper crimping tool is required. For heavier usage, use a tool that performs both crimps at the same time.
CoolRodz
Reviewed in the United States on August 28, 2024
Did what I look for in a crimpable terminal. Fit the wire size and make good clean crimps repeatably. Never lost a terminal due to a bad crimp during the whole project! Turns out the GT150 series uses more than one type of terminal, be sure to check the catalog available online!
Tim
Reviewed in the United States on May 5, 2024
Works well on thin insulated wire. No so good on heavier insulated wire sold at the parts store.
Jay
Reviewed in the United States on January 8, 2024
Good quality terminals.Terminals arrived on strips in a sealed poly pouch.Nothing more to say other than that they fit inside the connector and the terminal plating looks good.Value seems to be equal to ordering bulk terminals from retailers such as Mouser.
Bonnie
Reviewed in the United States on January 30, 2024
A 22 Ga. wire crimped well and passed a pull test. I used heat shrink instead of a socket to make test wires. They made good electrical contact.
Recommended Products
$27.54
$ 11 .99 $11.99