Your cart is empty.
Your cart is empty.Glass is a universal print surface for 3D Printing. Almost all types of filament will print to glass in one way or another. Just place the glass on your print board and clip it in place! To print with ABS or PLA, lightly spray the surface of the glass with AquaNet hairspray, then install the glass. For Nylon, we’ve found a light coating of UHU Glue stick seems to do the trick! If you don’t yet have a glass surface, you’ll want this one! This glass has been specially ordered and modified for use in 3D Printers. This type of glass is not available at your local hardware store or big box home center. Size: 250mm x 300mm x 3mm, good fit Qidi X-Max 3D Printer and all 3D Printers with 250mm x 300mm or bigger printbed.
Jupiter B.
Reviewed in the United States on September 4, 2022
I bought this to upgrade the bed of my qidi x-max and so far it has been a great upgrade. Be sure to utilize hair spray to get your print to stick if utilizing PLA and a glue stick for nylon, etc.Make sure to re-level your bed!!
Rene B
Reviewed in the United States on September 30, 2022
Bought this for my qidi x max fits fine and works great
BT Business Solutions LLC
Reviewed in the United States on March 11, 2022
Glass looks clean and free of imperfections. Haven’t printed with it yet but looks like a sound product.
john arnold
Reviewed in the United States on February 5, 2022
It's flat and heat resistant and fits my bed perfectly.
Wolfgang Gaerber
Reviewed in Germany on September 20, 2021
NAtürlich muss man die Platte befestigen - man kann das mit Kleber auf der Aluplatte befestigen oder auf einer alten MAgnetplatte - nicht vergesen vor Z-Achse nach unten zu nivellieren.Für das Drucken von TPU optimal -manche PLA Sorten machen Probleme...Aber eine gute Alternative zur Originalplatte...
DaveSSI
Reviewed in Canada on September 15, 2020
I was extremely nervous about getting glass shipped to me, but Amazon came through again with their awesome packaging - this glass sheet is in perfect shape and is everything I had hoped for.
is Awesome!
Reviewed in the United States on July 28, 2020
Upon my very first print, my glass was scratched by the scraper tool that came with my Qidi printer that I have been using to remove every project from the printing plate. I was very gentle and delicate (as usual) with the scraper as I removed my face shield from the glass, but unfortunately I noticed a slight nick happen during the process. It was almost as if a sliver of glass was shaved off, leaving a slight indentation. Very disappointing for such an expensive printing board. =(
Species8472XGN
Reviewed in the United States on June 9, 2020
So far so good. Test print with Carbon Fiber Polycarbonate was excellent. Easy to remove from bed after printed. Used Glue Stick. Mounted using thermal tape and one of the magnetic sticker boards. :-)
Patrick G. Babcock
Reviewed in the United States on May 29, 2020
Perfect size for the X-Max build plate - caution, though: it adds a few millimeters to the height of the plate, and beware putting any clips in the path of the extruder. I glued mine to one of their magnetic plate "stickers". Works perfectly for lower build plate temperatures without adding the clip hazzard. But no matter what: you will need to reteach the home position for the Z-Axis if using this...
Customer
Reviewed in the United States on December 9, 2020
I purchased 2 of these to replace one that broke after many months of good service. both are about .2mm to thick in the center. I thought there was something wrong with my bed or bowed X,Y bars, until I tested some of the qidi original bed stickers I had packed away, and they leveled out perfectly to disprove other faults.
Recommended Products
