Your cart is empty.
Your cart is empty.Product Description
- Compatible with：Alternator fit for 2008-2022 Toyota Sequoia,2007-2016 Toyota Tundra
- An AC generator is a common electrical device that can convert mechanical energy into electrical energy. Its working principle is based on the phenomenon of electromagnetic induction. By connecting the induced electromotive force generated by the movement of a conductor in a magnetic field into a circuit, alternating current energy can be generated.
Installation steps
- First, disconnect the battery cables. Locate the alternator on the vehicle. Use the serpentine belt tool to loosen the belt, followed by removing it from the alternator pulley. Put the bolts supporting the alternator back in place; the number of bolts should be at least 2 and no more than 4, depending on the make and model. Use a socket and ratchet to loosen and remove the bolts. Remove the alternator, then unplug and remove all nuts connecting the electrical components.
- NOTE: Check the new alternator and compare it to the old one to make sure the voltage calibrator and pulleys match before installing.
- Reverse the process to install the new alternator. Connect the electrical plugs and wires on the new alternator. Once the alternator is slid into place, start bolting the old one in the correct position. Put the alternator pulley back in place and secure it.
- Be sure to check that the pulley is aligned with the belt tensioner. Use the serpentine belt tool to control the desired tension and slide the belt back over the pulley, then the tool can be released by the tension of the belt. Reconnect the battery cables.
- Note：After installation, if you find that the battery malfunction light is on and off, and the voltage is found to be unstable, please replace the fuse related to the generator, as the aging of the fuse will lead to unstable generator power output
Ruperto Vega
Reviewed in the United States on March 30, 2025
The alternator was good fit perfect. The plastic Piece that covers the positive terminal would not line up right. I had to waller out the hole/slot so it would fit and line up.
ernesto rua
Reviewed in the United States on March 27, 2024
Good
mario chinchilla
Reviewed in the United States on October 13, 2024
Not an easy job but was able to remove it through the picture location. Had to rotate it. Power steering pump is held by 2 bolts. No cooling hoses removed.
Recommended Products