Shopping Cart

Your cart is empty.

Your cart is empty.

2Pcs NRF24L01+PA+LNA RF Wireless Transceiver Module with SMA Antenna 2.4G 1100m & Wireless Module with Breakout Adapter On-Board 3.3V Regulator

Free shipping on orders over $29.99

$9.99

$ 3 .99 $3.99

In Stock
  • NRF24L01+PA+LNA Wireless Transceiver Module is a 2.4GHz ISM band transceiver, compatible with Raspberry Pi. Auto-acknowledge and auto-retransmit abilities; Support up to six channels of data reception; the transceiver come with power amplifier and SMA antenna, which make the effective communication distance has been greatly expanded.
  • A host microcontroller can communicate and configure the nRF24L01+ over a 4-pin Serial Peripheral Interface (SPI). The configuration registers are accessible through the SPI connection. Configurable parameters include frequency channel (125 selectable channels), output power, and data rate (data rates: 250kbps, 1Mbps, and 2Mbps).
  • RF24L01+ Breakout Adapter: Small power on SMD LED indicator, On-board 3.3V voltage regulator, which accepts +5V power supply input and provides 3.3V for the attached "nRF24L01+" module.
  • Applications:It can be wildly used in wireless remote control such as RC planes/vehicles, wireless audio, wireless voice transmission such as VoIP, wireless networks, smart home,somatosensory devices, RFID, NFC etc.
  • Package Included:2 x NRF24L01+PA+LNA Wireless Transceiver Module+2 x SMA Antenna+2 x NRF24L01+ Breakout Adapter



Product Description

NRF24L01+PA+LNA RF Wireless Transceiver Module

Description:

The wireless transceiver module can set up your wireless communication system. You can add it with your own MCU/ARM/PIC/AVR/STM32 system, this module also come with power amplifier and SMA antenna, which make the wireless communication up to 800+ meters with No Barrier.

Note:

1.The module has 5V tolerant inputs, the power supply must be 3.3V, but the data and control inputs can be 5V(I/O can be 5V).

When the module used with RC planes/cars, please note:

1. If only a single reception and a single transmission are used, then a code value is required.

2. Please pay attention to environmental interference during use.

NRF24L01+PA+LNA Wireless Transceiver Module Specification:

PA Gain: 20dB
LNA Gain: 10dB
Range: 800+ meters line of sight
Frequence: 2.4GHz~2.5GHz
Multi-frequency: 125 frequency
Operating voltage: 3 ~ 3.6V Max(Recommended 3.3V)
Max Transmit Operating Current 115mA
Max Receiving Operating Curent 45mA
Pin Quantity 8Pin
On-board AMS1117-3.3 chip

NRF24L01+ Breakout Adapter:

  • Compatible with Arduino and for Raspberry Pi
  • Pin Quantity:8Pin
  • On-board :AMS1117-3.3 chip.
  • Voltage Regulator Input Voltage (connected to VCC): 4.8V ~ 12V
  • Small power on SMD LED indicator

PhilS
Reviewed in the United States on March 3, 2024
They worked for about a day. Then stopped responding. I wasted hours trying to figure out why.
Customer
Reviewed in the United States on September 27, 2023
Didn't work out of the box. After much testing just to set up before wiring my rc device it just never worked at all.
Sam
Reviewed in the United States on December 11, 2022
It was cheaper than all other sellers but after I started using it, it reliably transmitted about half the time
Recommended Products

$77.01

$ 34 .99 $34.99

4.5
Select Option

$59.00

$ 26 .99 $26.99

4.4
Select Option

$33.99

$ 14 .99 $14.99

4.6
Select Option