Your cart is empty.
Your cart is empty.Product Description
3/8 IN Fuel Line Fuel Pressure Barbed Push Lock T-Fitting Adapter with 1/8-27 NPT Sensor Port
Fuel line fuel pressure barbed push lock t-fitting adapter allows users to install a fuel pressure sensor to a 3/8 In inner diameter fuel line,T-fittings allows you to tee off your vehicle,s fuel line for accurate fuel pressure readings directly from the source.Protect your engine!
How to Install:
- Step 1: Cut Line
- Step 2: Lubricate T-Fitting & Hose-Ends
- Step 3: Securely seat hose to fitting
- Step 4: Install and tighten hose clamps
Specification:
- Hose Barb:3/8 in
- Hose Clamp:7/8 in
- Female Threads:1/8-27 NPT
- Clamping Range:22.4-24 mm
- Fitting Material:304 Stainless Steel
Package Include:
- 1 pcs Fuel Pressure T-Fitting Adapter
- 2 pcs Clamp
- 2 pcs Rubber ring
Robert J. Susmark
Reviewed in the United States on February 21, 2025
Works as designed , picture shows it clearly
D Rob
Reviewed in Canada on August 2, 2024
Good product
lucas
Reviewed in Canada on July 5, 2024
i’m having a issue where i can’t get the fuel line to set, and not leak, i have tried 2 different hose clamps but still seems to leak
Scott
Reviewed in the United States on June 21, 2024
As expected and did the job I wanted them for. Not much else to say.
les
Reviewed in the United States on June 21, 2024
The gauge is the best way to keep a watch on the fuel system.It made a huge difference for me in gas milage and the cost paid for it's self.
DonH.
Reviewed in the United States on March 5, 2024
I needed to install a pressure gauge in my fuel line. This made it easier
Kinnard Rogers
Reviewed in the United States on December 4, 2024
I like the quality fast shipping no issues
marvin moses
Reviewed in the United States on December 2, 2024
Helped me to get the pressure correct on my carburetor
Customer
Reviewed in the United States on November 13, 2024
Works as described.
Barrett Performance and Engineering LLC
Reviewed in the United States on September 30, 2023
So I know you're not going to be able to manufacture a fitting that has true to size internal diameter for the size hose it's going in and actually be able to install the fitting, but this fitting is clearly undersized. It is a robust steel fitting so more could definitely be bored out of the ID amd it still be plenty strong enough. Measured against XDP's knockoff of a PureFlow AirDog/Vulcan fitting shows a pretty large difference in ID. Probably not going to be the end of the world for most applications, but if your system demand is on the edge of what a 1/2 system can supply, checking the internal diameter of your fittings is something to pay attention to and this fitting will cause a restriction. It is smaller internally than a 3/8" hose is.
Recommended Products
$22.99
$ 10 .99 $10.99