Your cart is empty.
Your cart is empty.Product Description
Ezprint 8K is an easy-to-use high-precision rigid resin that can easily handle both flat and smooth surfaces and models with many details. This resin has high fault tolerance for adding supports and printing settings, and is not picky about 3d printers. EZPrint 8K resin has a low odor and is very easy to clean. Moderate post-curing can ensure long-term moisture resistance and stable state of the printed parts. It is an ideal material for producing miniatures, GK, figure toys and precision parts.
Tiny Structures are Strong, Supports "No-Trace Supports"
It has good tensile, flexural and notched impact strengths, so we don't have to be so careful when cleaning or trimming the tiny structures of our prints with an ultrasonic knife. You can try to add "No-Trace Supports" to your 3D data with "Contact Diameter" of 0.2-0.3mm.
Print Settings
- Operating Temp: 20~35℃/68~95℉
- Layer Height: 0.05mm
- Exposure Time: 2~3s
- Bottom Exposure Time: 45~65s
- Lifting Height:
LCD Screen size less than 8.9 inches: 5mm
LCD Screen size ≥8.9 inches: ≥8mm
- Rest Time After Retract/Off times /Light-off Delay: ≥2s
"Anti-aliasing"/"Grayscale" remains OFF！
Cleaning and Post-curing
- Cleaning time: ≤10mins
- Cleaning solvent: 95% Ethanol or IPA
- Post-curing light source: 385-405nm UV(40W)
- Post-curing time: 3-5mins
Material Performance Data
Water Absorption(24hr)：0.50%
HDT(0.455MPa):72℃
Material Performance Data
- Viscosity(25℃):310mpa.s
- Shore Hardness:90D
- Tensile Strength:60MPa
- Tensile Modulus:1.5GPa
- Elongation at Break:8.60%
- Flexural Strength:99MPa
- Flexural Modulus:2.4GPa
- Notched IZOD:18.5J/m
Precautions
USE：
1. Operating temperature : 20~35℃,68℉~95℉
2. Shake well before each use.
3. Please wear goggles,nitrile rubber gloves and respiratory masks when working with any 3D printing resin and when cleaning prints, and maintain a ventilated environment.
4. Do not use resin near windows, balconies or other strong ultraviolet environment.
5. If you accidentally get resin into your eyes, mouth or nose, rinse immediately with plenty of water and consult a doctor.
6. The resin remaining on the skin can be washed with soap, hand sanitizer, etc.
Waste liquid：
1. If the resin is no longer needed, please pour it into a transparent container (pour a small amount at a time), then place it in the sun to completely cure it.
2. If it is a cleaning fluid containing resin, please do not discharge it directly into the sewer. You can put the cleaning solution in the sun first, wait until the resin inside is completely solidified and precipitated, and then filter out the solid residue, and the filtered cleaning solution can be used continuously.
G. Holcombe
Reviewed in the United States on August 2, 2024
Love this color! It's what I've been looking for in resin color for BJD dolls. The resin prints beautifully using the recommended settings and cures to a very tough finish. I need some more colors in the resin. Please!
Billy M
Reviewed in the United States on January 26, 2024
This is a very good basic resin that prints very well. It was very forgiving for different settings, i tried a pretty good range of exposure settings and layer times and it printed as you would expect and pretty well for most settings. I would not drop the default layer too much time for your machine, as it did not seem to adhere well enough. But if you throw the defaults on it printed very well, at least it did for my saturn 3 and Mars 2 pro. I would recommend this for anyone, especially beginners if they want a good high quality resin. The durability after printing and processing seemed to be just as good if not a little better than a standard resin. I accidentally left some in the curing machine overnight and it did not crack as I have had some resins due, so it does well for user error. It's your standard Gray and probably would take well to dies, but i got the gray so I didn't try. If you need some good basic resin I highly recommend.
Saul V.
Reviewed in the United States on April 9, 2024
I print a lot of statues on my resin printer, and this resin came out nicely!I printed a broly statue and I had no issues printing the parts. It had good adhesion to the build plate and the supports were easy to take off. A lot of resins have a strong odor, and while this one did have a smell, it wasn't overpowering and awful.The color is nice, bright, and kept details.I would definitely recommend this if you need a bright flesh color resin, might look more into this brand of resin.
Erynn
Reviewed in the United States on April 4, 2024
I'm pretty impressed with this resin. I'm pretty impressed with resin printing in general. I love the tiny details that can be captured and this resin has really improved some of my prints.It doesn't have a strong odor like some other resins, which is nice, but I'm not going to risk not wearing a mask or gloves, but it makes printing in my house nice and easy.This is a great choice for anyone in 3D printing.
Michael R.
Reviewed in the United States on April 25, 2024
I've tested a number of resins in the past including white. One of the common issues I have is getting it calibrated can be a chore even on basic colors (white, gray, black, blue). This one was not which was a nice surprise. Took only a few calibration tests (validation matrix, ameralab town, and siraya tech's) to get it dialed in. First print was over 200 hinge clips for boxes. Not a single failure and they came out beautifully. next printed a batch of minis. They aren't the highest quality minis but enough detail to test resin. One failure but I'm chalking it up to a few missing supports. Otherwise came out as good as any standard resin I have used. Since I have little use for straight white I added dyes like I originally planned on. 3 different batches, a blue, dark red, and dark purple. As expected a tweaking of the exposure time was needed. But even with the added color I had no issues printing the larger figurines and busts. Overall a resin I am more then happy to add to my standard stock.
Dave W.
Reviewed in the United States on October 3, 2023
I like the outcome of the print when it works. I get out 3 tries to print only 1 will print. When it gets to layer 10 I think, the print will release from the buildplate and I don't know till about hour before it finishes when I look and see nothing has printed. The resin is good and seems strong. I can see the lines where they are on the print when it's done. No this is not done on a 8k printer so I can't get that detail I was hoping for. For the money it seems to be good especially when this has a 3 year shelf life according to the date stamped on the bottle. It seems that it's easy to clean up too when done printing. If there is a recipe that helps get this to stick better to the buildplate then it would be great to buy again.
Joe P.
Reviewed in the United States on October 25, 2023
This XIAOJIN 8K printer resin comes in your standard heavy duty plastic bottle. It printed with settings pretty much the same as I use with all my other prints, having to go up to 2.8 seconds to get it to print well in my setup and environment. I use a Saturn 2 8K so my printer can make good use of this resin. I've been using lots of different resins recently and I can say that while it does produce great prints, I normally don't use 8K resin in my printer. While this does produce highly detailed prints, I can't say that there is a significant increase in print quality and detail with this resin. I'd be hard pressed to find enough differences with this 8K resin to say it is worth using it on a regular basis. I'd say save it for special projects as there just isn't enough increase with it to make it worth using on less important things. Strength wise it seems to be similar to ABS like resins in strength.Some issues, they say it is very low odor. I can say that while it doesn't have as strong of smell as other resins, it still does have an odor. They also say it has a "no detect" rating on VOCs. I'm going to have to call BS on that. All UV 3D printer resins are loaded with VOCs, it really is unavoidable. Lack of scent doesn't mean lack of VOCs. It just means you can't smell them.As for it resisting water absorbing, I can't say that I tested that. Mainly because I don't foresee needing to get my prints wet with water. If I ever do have a need for it, I can test that. Besides the fact I'm not even sure how I would test that claim of theirs.
Recommended Products