Your cart is empty.
Your cart is empty.
How to Use:
fix the steel dowel maker on the workbench, cut the blank with chisel to the straightest, otherwise the dowel will not be straight; Cut off the 4 corners of the front end of the blank, find the most suitable hole, tap it through the dowel plate with the tool, then move the plate to the next hole and repeat the previous step until you achieve the desired effect
Specifications:
Material: A2 Steel
Size: 15.2 cm/ 6 inches (length), 5 cm/ 2 inches (width), 1 cm/ 0.39 inch (thickness)
Package includes:
1 x A2 Steel Dowel Plate
Notes:
Manual measurement, please allow slight errors on size.
The color may exist a slight difference due to different screen displays.
William
Reviewed in the United States on February 7, 2025
Works very good. Removes excess to size the dowels to the right diameter.
Otto von B
Reviewed in the United States on September 29, 2024
It kind of works, a little better if you use a drill instead of a hammer. I hope this could be sharpened but the geometry may be destroyed.
Tim R.
Reviewed in the United States on May 25, 2024
Used, scratched, and covered and caked in wood dust.
Richard Stanislaw
Reviewed in the United States on May 23, 2024
Solid construction
J. Wolf
Reviewed in the United States on March 18, 2024
A dowl plate is a simple tool and therefore, shouldn't cost an arm and a leg. This one is reasonably priced. It is accurately sized holes then the plate is surface ground so that it works well. A good choice.
Mobilephonebill
Reviewed in the United States on February 21, 2024
This a great dowel and peg making tool that should be in everyone’s toolbox. It has a lot of incremental holes that’s helpful when making thinner dowels from fatter ones. I use it to ensure store bought dowels are the proper size since they rarely are. It works best on straight grained softwoods and can leave ragged sides on featured grained wood like red oak and walnut. But the holes are accurate and it does the job I bought it for.
Customer
Reviewed in the United States on November 20, 2024
Been using this to reduce the size of dowels as well as turning scrap wood into dowels to patch holes in projects that I have been working on.
mark S
Reviewed in the United States on September 4, 2023
See title.
Recommended Products
