Your cart is empty.
Your cart is empty.Product Description
AXIAL Series
Heavy-duty fan kit designed for various DIY projects that require cooling or ventilation, and as a replacement for many fans on the market.
Key Features
Heavy-Duty Fan
Each fan is constructed of die-cast aluminum and suitable for various environments. Thermoplastic impeller has high flammability resistance.
Dual-Ball Motor
Dual-ball bearings rated at 67,000 hours allows the fans to be mounted flat or upright. Impedance protected motors have a high resistance to heat.
Quality Approved
UL recognized axial fans under #E503903 in 2018 by Underwriter Laboratories. Archived in UL Online Certifications Directory.
Plug and Play
All fans run at 100 to 125V AC and include a power cord. Just plug it into a wall outlet to start the fan. Includes dual fan guards and screw set.
Jorge Alejandro
Reviewed in Mexico on March 26, 2025
todo ok. perfectos sin problema. silenciosos
DetectiveWork
Reviewed in the United States on March 16, 2025
I've purchased two of these. A couple years ago I bought one to cool down my mother's old Harman-Kardon AV receiver (placed horizontally on the top panel).Recently the built-in fan of an old rack mounted power amp of mine stopped working. The amp's heat protection was turning it off and on as it was overheating. I placed the LS12038 standing vertically in front of the amp's vent slots to pull air through the amp; no more overheating.
Ralph C.
Reviewed in the United States on January 10, 2025
This fan was packed with a foam insert so that nothing moved or could get damaged. The manual was packed in a separate vinyl sleeve as were the fan grills and mounting screw. Nice job!The AC plug gave me a little resistance but once I pressed hard enough, it went right on. I plugged it in and the fan immediately turned on and blew air but very quietly.I needed a quiet fan to take away the soldering fumes when I work on small electronics at my desk. It's quiet enough so it doesn't disturb my wife while she's working in the same office and has no problem taking the soldering fumes away.
MS
Reviewed in the United States on August 10, 2024
I bought two of these and wired them into a soda machine to replace two broken evap fans. These fans out performed the factory fans that came with the machine. They were smaller and less noisy. The machine ran so much cooler with these installed and were a whole lot cheaper than the factory fans. Would buy these again if needed.
5982
Reviewed in Canada on July 24, 2024
This is a good quality and well made fan. No vibration, very low noise. Detachable power cord, powder coated grills. Looks nice too. Even the box seems high end.
agustin
Reviewed in the United States on December 30, 2024
Attached this fan to my diode laser enclosure. It's very quiet but not enough flow to extract the fumes quickly.
D. Brewer
Reviewed in the United States on September 13, 2023
I can't really quantify how quiet it is, but it was quiet enough for my application. I bought it for the 120V, the published longevity, and the airflow. I did buy 2 because I wasn't sure how well it would work for me and as it turned out, I only needed one. I kept the 2nd fan just in case it is needed, or possibly for another applicaiton. Seems to be well made and has been running well for several months now.
G. F. Hagele
Reviewed in the United States on August 17, 2022
This is a replacement for an operating fan in my 12VDC - 120AC 4k Watt inverter that was terribly noisy.Item arrived well packaged with all necessary mounting hardware. Standard two-prong AC outlet cable provided, although direct wiring for my needs was easy.CFM is more than adequate for my system. IR temperature readings show air circulation is doing the job. Fan is very, very quiet, which was the entire reason for the swap. It makes all the difference in the world.
Medo
Reviewed in the United States on March 5, 2022
This is a quality metal fan that lives to its noise specification. While I cannot confirm that it's exactly 32 dB, I can say it's really silent and it takes effort to hear it.Fan is made almost completely of aluminium and gives a really solid feeling. Once you mount it, it goes nowhere. I love the way it connects to the power cable as it allows for easy mounting with cable detached and then you can plug in cable even blindly.The only issue I have with this fan is its mounting method. It has just simple holes you can pass the included M4 screws through. I find this mounting method rather unclean and I prefer directly interfacing a good machine screw. Fortunately, it's easy to convert 4 mm hole into #10 machine screw thread. The only thing you need is #10 tap. It works like a treat.
Vale
Reviewed in Mexico on March 20, 2021
La calidad de este ventilador está perfecta, no hace mucho ruido molesto, todo el marco es de metal por lo que se vuelve pesado. La velocidad del aire también es buena. Lo utilicé para crear un tubo de aire para un limpiador de semillas y funciona perfecto. Si lo compraría otra vez cuando necesite uno nuevo.
TJ
Reviewed in the United States on January 16, 2021
So yeah this fan seems to be of high quality construction and moves a decent amount of air. I wanted to have a fan to get some air flow around my router, fiber modem, NAS enclosure, etc. as even though everything sits on a shelf, the lack of airflow sees everything just kind of stewing. Everything is way cooler now so the fan does the trick.My only beef (which there is a solution for) is the act of moving air does inherently generate noise. When things are really quiet you can definitely notice the soft hum of the fan going and the amount of air it moves is kind of overkill. The solution then is the potentiometer kit they sell. It's super high quality as well and it appears like it has four positions (off, low, medium and high), but it is really a potentiometer with infinite adjustability from off to full power. I think offering a "kit" with both the controller and fan with some of discount would be awesome. It's a bit of a face palm to buy a ~$15 fan and then have to go back and spend ~$13 so the fan isn't full-tilt all the time.
Stephane Cimon
Reviewed in Canada on December 10, 2019
I used those fans into a fireplace door frame to blow more heat in the whole living room. It does get very Hot in there, like they say they are really Heavy Duty Construction and they are holding on to flammability! They are Great quality (double bearing) they do a Great job and very quiet!
Neil
Reviewed in Canada on November 29, 2018
An absolute beautiful piece of kit. Super Solid aluminum body. Everything about this fan is top notch quality. I can't see a project cooling fan being any better than this. Lots of air moves and extremely quiet considering the air flow. Fan guards are solid metal and amazing quality and design. All mounting hardware and silencing washers included. This is no cheap China fan. This thing's legit.
Recommended Products