Your cart is empty.
Your cart is empty.RewindByDesign
Reviewed in the United States on August 4, 2024
Didn’t work. Both green and red lights on when plugged into computer, which didn’t recognize the device. Tried multiple computers, cables, etc. Apparently this is a common issue with this 16MB version of this board, as I found out after the fact from internet searching trying to trouble shoot the problem. Anyways, I won’t be trying to use this product again.
Greg S.
Reviewed in the United States on February 21, 2023
I've bought literally dozens of these from Adafruit I've the years. Versatile, easy to use, and reliable. Built in Amp is space saving and reduces wiring complexity. I always opt for the 16mb version because I always seem to use up the capacity. Cutting the G0 and G1 leads is a nice option for extra Amp boost.
burnem79
Reviewed in the United States on December 5, 2023
This is so simple to use, you load audio into it like you would on a USB stick. Connect the minimum number of pins needed to operate and it works! I have this working with a reed switch that passes random magnets. I have the reed switch connected to ground which is connected to pin 1. Works great.
E. Heilner
Reviewed in the United States on March 7, 2022
The media could not be loaded.
cody
Reviewed in Canada on October 28, 2022
Within seconds of adding 5v power the amp chip got so hot I burnt my hand
Jeff A
Reviewed in the United States on April 15, 2021
If playback is set to loop, there's still a short pause between the end of the track playback and 'restarting' at the beginning. The documentation says that "there's a ~20ms delay (imperceptable) between WAV replays", but I beg to differ... It's more like 100ms second and is clearly perceivable/noticeable. (And yes, I'm using WAV files.)Also, it's got about 125ms delay between button press and audio start. That's too slow for my liking too. The documentation also states that is "within the 'instant feedback' expectation". But again, I beg to differ. Imagine if your first-person-shooter game had a 125ms delay between button press and weapon fire...Other than that, it seems like a neat gadget, just not what I need/want for my project. If you just want a customized 'Easy Button' type device that you can make say/play virtually anything you want, and even have up to 11 different phrases, then this is the thing for you. But if you want gapless playback and instant response to button presses, then pass on this.
WC BOYT..
Reviewed in Canada on February 12, 2020
When it comes to sound modules and the ease of loading effects and hook up makes Adafruit the go too module for most applications
Sean G
Reviewed in the United States on May 13, 2019
I used this to add sound and lighting effects to a Star Trek phaser rifle (Type III from First Contact). I'm a prop builder and a novice when it comes to circuitry. I opted to give this product a try for a quick and easy install rather than trying to customize an Arduino micro-controller. Boy am I glad I did! This board has an integrated amp and is pre-programmed with various switching and audio playback capabilities. My specific application was simply a phaser sound when the trigger was pulled. I also wanted a synchronized muzzle flash which this board was also able to accommodate!Installation:BATTERY: I highly recommend a rechargeable lithium Ion battery pack, sizing dependent on your application and space requirements. Adafruit products have you covered here as well. You can also go with a AA or AAA battery holder, three-pack is ideal to provide 3.5v to the board. The battery is wired into the VIN and GRND pinouts.SPEAKER: A stereo audio pinout adapter is included and makes connecting a speaker super easy. Solder the adapter and screw the speaker leads in.SWITCH: The board comes with a series of audio switch pinouts. Wire a momentary switch to one of these pinouts and ground. The pinout number used will correspond to the audio file naming so be sure to make note of which pinouts you're using and what sound you want each of the switches to trigger.AUDIO FILES: This is where this audio fx board really shines. There is NO CODING involved here. The functionality is pre-programmed into the board. You can find a tutorial for the audio playback on Adafruit's site. In short, you'll name the file (.wav or .ogg) and load it to the board (USB from board to PC). That's it!SYNCHRONIZED LIGHTING: For my application, I wanted a muzzle flash to light up when the audio file was played. There is an ACT pin, or 'Activity pin' that allows just that. It grounds your component when the board is active, i.e. playing a sound. I soldered an LED to the ACT pin as the ground and then to my main parallel circuit + and viola! Muzzle flash!I love these little boards and plan to use these as my go to for costumes and props going forward. I've dabbled in Arduino and have no desire, at least not currently, to delve deeper into that world. If you need sound for a project, and possibly lighting, give this board a shot! For a few bucks more than Adafruit's site, I love the ability to grab one of these quickly with Prime Shipping. I'm impatient and there's nothing I hate more than a delayed project waiting for parts.
Some Random Guy
Reviewed in the United States on October 15, 2019
Awesome board. There are so many projects you can do with this board, pair it with an Arduino or add some buttons. I used this to create sound effects for a 3d printed Halo needler. Adafruit could not have made adding sound to a project easier.
Jim G
Reviewed in the United States on November 15, 2018
Works as advertised. Somewhat slow to upload the sound files. That was a surprise.
Recommended Products
