Your cart is empty.
Your cart is empty.Denise Zelt
Reviewed in the United States on November 5, 2024
These are a bit pricey for a 150 spindle replacement, but they made the installation so easy. Our staircase had non-standard angles; these angle connectors adapted easily to all our conditions. Highly recommend for a solid stair rail - use them on both the top and bottom of the spindles.
CCLee
Reviewed in the United States on April 1, 2023
This was my second order. Was impressed by first order because product was packed well and received earlier then expected. Great design, worked well for my application. Made changing out wooden spindles easy. Can't wait to change them all out.
Mohammad Saad
Reviewed in the United States on November 2, 2022
Highly recommended! Made job a lot easier. By far the best product available on the market!
Jeff
Reviewed in the United States on April 9, 2022
These work great and are simple to use. You really only need 2 screws to secure each side, so having a 3rd for each connector is a nice-to-have when you drop a screw 12 feet into the foyer below. The long shaft gives you a good 1/4" extra to play with if your cuts are not precise.My only gripes is that there is a lot of packaging waste and the instructions need to be more clear. You need to cut off 1/2" per side, or 1" total from the length between the rail and the surface. Thankfully I test fit my first few and cut off too little instead of too much.I just got done installing 65 balusters using 130 of these and everything went smoothly once I got rolling.
Heath C James
Reviewed in the United States on August 1, 2021
As a carpenter if your going to install metal stair balusters this is hands Down the easiest, fastest and simplest way to do it. Its more expensive price wise but you make up for it in the time and headache that's saved from not having to drill and line up a bunch of holes
Customer
Reviewed in the United States on June 7, 2021
This made changing out wood spindles out to Rod Iron ones super easy and simple.
Reg
Reviewed in the United States on March 14, 2021
Worked well and fairly sturdy. Instructions say to use a 1/16th drill bit to pre-drill screw holes. I have oak stairs I found it easier to use a 3/32 bit. Otherwise the screws had a tendency to strip the heads.
Denise T.
Reviewed in the United States on December 22, 2020
This product made installing balustrades on my stairs so much easier.
Recommended Products
$47.30
$ 23 .99 $23.99
$36.15
$ 17 .99 $17.99