Your cart is empty.
Your cart is empty.Only the finest raw materials and state-of-art technologies are used to produce these vital mounting and cosmetic solutions that render a vehicle dashboard into an attractive showplace of pride and profits for your business. For something so vital, trust nothing less than American International Installer Preferred custom mounting kits. They pioneered the car stereo installation business, and over 60 years of experience continues to teach them that their innovation today, drives your business and their industry forward into the future. Installers and business professionals continue to rely upon the innovative and quality products that can only be achieved from within their Camarillo, California facilities where American International kits are produced to a precise quality standard that surpasses the OEM. AI only use the finest raw materials and state-of-the-art technologies to create mounting and cosmetic solutions that render a vehicle dashboard into an attractive showplace of pride for your craft, and the primary profit center for your business.
Christopher
Reviewed in the United States on September 28, 2024
The picture looks like there is a gap but it's just the shadow, this fit perfectly with my Pioneer DMH-342EX in my 2011 RAV4I had to cut out the middle bar so I could fit a double din deck and also had to grind off plastic on the back of the mounting brackets. You will know what I mean if you order this, the plastic goes around the back of the radio and covers the plugs for the deck and antenna, very easy to remove and for how amazing the finish looks, I would say this is the best fit for 3rd gen RAV's. Assemble the dash kit first, attach it to the radio so it looks snug, then plug it in and mount it to the car.Made everything looks professional :)
Thisismyname
Reviewed in the United States on December 14, 2024
Perfect fit! I used this for a Dual DCPA723W in a 2011 RAV4.It leaves no gaps and the plastic has a nice texture to it.Only complaint is that it is finicky to get together, but it’s worth it in the end.The design allows you to countersink your head unit to your personal preference, which I think is very nice!All-in-all a perfect dash kit in my opinion and at least 2x as nice as the Metra!
BobK
Reviewed in the United States on November 23, 2022
Pro: good value, and it eventually came out looking pretty goodCons:* Many reviewers say this is an easy install, but I found it frustrating and somewhat difficult. The manual is probably written for people who do installations for a living. The line drawings are primitive and confusing, and a couple of assembly steps had me stumped until I tried enough combinations that finally I stumbled onto the solution. It's probably obvious to experienced installers, but not to me I'm afraid.* The kit is made of somewhat thin plastic, but it's mostly well made. There's one thing I didn't like: My original Rav4 radio is held in by two sturdy bayonette-like clips that engage when you push the radio into the dashboard. They are nicely designed, and make it easy to pull the radio in and out from the dash when needed. On this kit, these are replaced by two cheesy metal clamps that you slide onto slim plastic posts. There's a significant chance the clip will pop off when you're pushing the radio in, and disappear into the bowels of your car. Even worse, if you decide you need to pull the radio back out (to check connections or whatever), the chance of losing a clip is even larger. I came close to losing one of my clips, but got lucky. I wasn't sure where to get a replacement if I had indeed lost one. I hope I don't ever have to take my radio out again!
Paint
Reviewed in the United States on October 29, 2021
Didn't come with the 4 small phillips screws and 2 metal clips that are necessary for installation. Had to return and went with the Scosche TA2055B. The Scosche does leave a small gap at the bottom, but the color matches better and it's made of a sturdier material than the Ai TOYK994.
Cameron
Reviewed in Canada on June 4, 2020
Fits surprisingly well. Was a little skeptical putting it together. The instructions aren't 100% clear but after using the instructions and a bit of sizing up and common sense it was all put together very clean. Also due to the spacers on top (which you do need) the screws to go in the radio were too short but it's still held securely in place just using 2 screws on each side on the bottom. (2008 Rav4 base model)
HIFI GUY
Reviewed in Canada on February 1, 2020
Fit for my 2011 Toyota Rav4. Dark interior.
Calvin Wong
Reviewed in Canada on July 2, 2019
I'm pairing this with an ATOTO A6 series unit. Now either the cheap Chinese double DIN unit is out of spec, or this cheap trim kit is out of spec because much filing had to be done to massage the radio into the trim. The radio mounting plates have plastic tabs at the back for front-back structural rigidity, but these force the radio too far forward creating a gap between the trim kit and the rest of the dash, and those same tabs interfere with ports on the radio, which I gotta imagine would be a problem with many other more mainstream brands. would be nice if those tabs didn't exist. Those mounting plates are also thick enough to warrant unusually long bolts on the top row of bolt points, which appropriate replacements are not provided for, which is a bummer. The trim also does not use the OE clip mounting points. The stock trim would mount to the rest of the dash via plastic clips at 4 points. The face plate of this kit has provision to use 2 of them if you screw on 2 tiny little extra pieces of plastic with easily stripped screws. If you don't use them, the face plate is dependent on the plastic radio mounts for structural support. That's not confidence inspiring engineering.Having said all that. After an entire Canada Day afternoon spent massaging this thing into being... It looks half decent. I'd prefer to not have needed an entire afternoon to make it work, but at least it's not utter trash.
Jesus
Reviewed in Spain on May 26, 2019
No están mal, para el bajo coste que tiene.Encaja todo perfectamente, sin forzar nada en su instalación.
Customer
Reviewed in Canada on December 23, 2019
Fit my ‘06 like a dream!
Bezoar
Reviewed in the United States on December 16, 2016
This was an inexpensive trim kit which fit my Rav4 very satisfactorily. Installation was straightforward, though not without some effort. There is some trimming of plastic tabs that will require cutting and sanding. The appearance when installation is complete is very good. At a glance it looks like it could have come from the factory. The color of the plastic is very close to the original material. It does not have quite the high quality luster of the original, but it is close enough and I am perfectly happy with the appearance.The quality of the material is not as good as the original radio's trim kit. The brackets which mount to the Rav4 are plastic rather than the original metal. Consequently they are not as strong and you have to make sure you don't tighten the mounting bolts too much or you will break the plastic brackets. It comes with some screws to attach to the radio, unfortunately they were not the right size for my unit and I just ended up cannibalizing the screws that came with the Rav4.Overall, especially considering the price, I am very satisfied with this mounting kit. I would purchase it again.
Randall j.
Reviewed in the United States on June 18, 2013
great product at a great price-(not toyota oem plastic quality, but mabey chevy-you know alil flimsy but works)-great product THIS PRODUCT GIVES YOU OPTIONS- plenty of parts an extras....caint wait to install it for my deaar ol dad but hes gotta buy a radio seeing how he wants gps and my mom cant turn on the tv on her own that pluss he wants a steak for 99cents and its goota b t-bone it might be alil longer....WANNA DO IT YOURSELF-consider painting this item!!! doesent match the interior 100% but i sugest painting it(painting tips:use 120 GRIT to sand first then gently(its a rougher sand paper)sand with 80grit i know sounds backwards but this ensures you dont have deep scratches and what ones are if using 80 grit GENTLY will blent better than a scratch,besides your next step is primer(always use the same brand paint)& primer fill up to 80g sand scratches let dry a day(use tac rag or alcohole wipe after rinsing under warm water to ensure clean productnever can be too clean at painting)paint 1 light coat(better to wait another day but)wait atleast another 20minutes before aplying another cote(never more than 7 coats total prim paint & cleal include all,after 7 it can crack)use ur favorite color (color toning:if ur car is a darker color use a darker primer and a lighter paint vise versa unless you want it bright then use bright primer/white white gray)candy clear coat(USE WITH LIGHT PAINT)take both cans spray simotainiously parelell together clear on the right paint on the left coat left to right then right to left gotta be exact all the way down(paint all edges n holes n gaps n corners n wedges & hard to paint areas first move faster past THEM laying the rest of the paint on once at the bottom (you can wait 20 min-as sugested but this WILL cause orange peel making the paint rough in heat can prematurely dry to much in some ares),so i just imeadiatly coat the item once to the bottom once at the bottom do the same BOTTOM to top witgh both cans(clear first) finaly add 2-3 coats of clear then let dry two days)you can wait 31 days to apply way or use dashboard protectant-i do)thats how u paint-man & i need a job huh!!!
Recommended Products
