Your cart is empty.
Your cart is empty.This is a galvanized ductile iron swing hanger with a shackle pendulum. These hangers are cast in two halves. The lower half of the swing hanger body has a shackle pendulum with a sintered bronze bearing incorporated into it to reduce wear. These bearings do not need to be oiled as the bronze is impregnated with oil. The pendulum is 1” wide and has a shackle with bolt so that there is no need for a connecting S-hook. The shackle pendulum is tamper resistant. It requires an allen wrench with a special pin hole head. The two halves of the hangers are bolted together with a 12mm carriage bolt and a hex lock tight nut. The pendulum is held to the hanger with a #12 axle bolt with a long shoulder, so the bearing does not ride on the threads. It also has a lock tight nut. This hanger fits a standard schedule 40 two inch pipe. This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner. Tensile strength is 5000 lbs.
candez
Reviewed in the United States on April 27, 2025
We purchased this for a home swing set, to replace the current mechanism (a U hook welded to the frame) that was starting to be worn through the metal.These are beasts that have saved our swing set. They are easy to install - took us maybe 5 minutes each to place the brackets, secure the bolts, and install the swing.The swing motion is incredibly smooth and easy.I suspect these are designed for commercial use more than personal use, but I'm so happy we ordered these. They have seriously saved our swing set. If you want something that is going to last through years of play, these are a great option!
Mark E. Stapleton
Reviewed in the United States on May 3, 2024
Worked for what it was intended to do
Recommended Products
