Shopping Cart

Your cart is empty.

Your cart is empty.

AMIR Indoor Outdoor Thermometer, 3 Channels Digital Hygrometer Thermometer with 3 Sensor, Temperature Humidity Monitor with LCD Display, Wireless Humidity Gauge for Home, Baby Room-Black

4.4 (1) Write Review
Free shipping on orders over $29.99

$25.99

$ 11 .99 $11.99

In Stock

About this item

  • 【Wide Range & High Accuracy】 - Upgraded 3-channel temperature and humidity meter with 3 transmitters for various environments. Remperature & Humidity rang: Indoor temperature (0 - 60℃); Outdoor temperature (-40 - 60℃); Humidity (10% - 99%). The temperature and humidity accuracy: ± 1℃ / ± 5%; Wet: humidity﹥65%; COM: 45%≤humidity≤65%; DRY: humidity﹤45%. The Station and transmitter signal distance: 100M/328ft.
  • 【Max & Min Record】 - This indoor outdoor thermometer wireless can record the temperature and humidity timely,display temperature and humidity changes of the main unit and 3 transmitters. The data update every 60 seconds. Press the ℃/°F button to switch between celsius and fahrenheit. Perfect on your house, office, factory, etc. Time & Alarm Clock, Calendar, Snooze / Light.
  • 【Clear HD LCD Screen】- Easy-to-read display as well as the humidity smiley icon shows that 45% is dry, 45%-65% is comfortable, and more than 65% is wet.
  • 【Backlight Function】- The humidity temperature monitor has backlight feature, shows digit clearly and wide field of view. Press the display backlight to turn it off automatically after 5 seconds, which help you to read the data clearly even though at night.
  • 【Easy to Operate】 - This indoor outdoor hygrometer thermometer suport base stand & wall hanging, very convient to place. NOTE: The station need 3* AAA Battery; Sensor need 2*AAA Battery.(not included). When the sensor shows the low battery icon, that means you need to change the new battery in the sensor.


Product Description

Wireless Indoor Outdoor Thermometer & Hygrometer

1

Temperature measurement range: 14.2℉ ~ 122℉ (-9.9℃ ~ 50℃); Temperature Measurement Accuracy: ±1.8℉ (±1℃)

Humidity Measurement Range: 20% to 95; Humidity Measurement Accuracy: ±5% (20% to 80%)

Temperature and humidity detection interval: 30 seconds

Ensure main unit and transmitter share a channel.

Press and hold CH button on main unit to initiate signal search; blinking sensor icon indicates reception.

Stable icon signifies connection.

Unit receives signals for 3 minutes hourly.

Suggestions for Use of the Main Unit:

-Positioned at least 6 feet away from electronic devices.

-Make sure to be within 330 feet of an outdoor sensor.

-Avoid obstacles such as walls, windows, large metal objects to minimize signal attenuation.

How to Use:

1. Insert 2 AAA batteries into the wireless sensor. Note the correct polarity. The red LED indicator flashes when the sensor is transmitting.

2. Open the battery compartment of the weather station, insert 3 x AAA batteries in the correct polarity and close the battery compartment.

(Note: The screen will turn off after 10 seconds, you need to press the button to activate it.)

Reboot the Mainframe:

If the base station seems to be displaying incorrect values, you should reset the weather station to factory settings.

a.Remove the batteries from the outdoor sensor and weather station.

b.Place the batteries back in the outdoor sensor and weather station.

c.Place them within a few feet of each other and hold them for about 20 minutes to maintain a solid connection.

1

Battery Change Procedure:

1. Remove the outdoor sensor and weather station batteries.

2. Reinstall the batteries into the sensor and weather station.

3. Place both a few feet apart and allow to sit for approximately 20 minutes to ensure a stable connection.

How to Connect the Main Unit to the Transmitter (reconnect):

After installing the batteries in the weather station, it will start receiving paired RF signals on the same channel from the outdoor sensor for 3 minutes. You can press the CH button on the base unit to match the correct outdoor sensor.

Normally, the outdoor sensor will automatically connect to the host computer. If it does not connect, follow the steps below to set it up:

- Make sure the main unit and transmitter are on the same channel

- Press and hold the CH button on the main unit to search for signals from the outdoor sensor.

- The sensor reception icon flashes while searching for a signal.

- After connecting the sensor, the icon will become stable.

- The main unit will continue to receive signals for 3 minutes every hour until successful reception.

If the transmitter has a new battery, you need to manually press and hold the CH button to re-receive the transmitter data.


Leo
Reviewed in the United States on January 11, 2025
When you need to determine the temperature spread throughout a building, you certainly have a few options that you can go with. You can use a complicated system that feeds information back to a central device, you could just use a central unit, or you could just use one of these little gizmos. The device comes with 3 additional detectors, allowing you to check the temperature for 4 total areas, one of which would have the display for feedback on things like if an area is dry or what it's average temperature is.So far I have confirmed that it does work excellently well and, while standard wifi tends to get jammed within the building I tested it in, the devices were able to speak with each other quite well and provide a nice update within a 50ft by 30ft area, even managing to send signals irrelevant of dense concrete walls.So if you need to determine if there's an area with airflow inefficiencies or if you want to look at the temperature spread of a central AC system, I can certainly recommend this device.