Your cart is empty.
Your cart is empty.Product Description
22323 Trailer Anti-rattle Kit
- Compatible with trailer hollow-shank accessories only.
- This trailer hitch anti-rattle fits virtually any 2-inch x 2-inch hitch receiver with a 5/8-inch pin hole.
This anti rattle hitch pin will reduce rattle and movement for hitch tray, cargo carrier, bike rack, trailer ball mount.
22323 Anti Rattle Hitch Pin Kit
- The is comprised of a threaded pin and .
- Together, the hitch pin and anti-rattle lock the shank in place and promote a quiet and more enjoyable towing experience.
Easy Installation
- Simple and quick .
1. insert the receiver hitch anti-rattle device into the accessory shank.
2.insert the accessory and thread in the hitch pin and tighten with a wrench.
A customer
Reviewed in the United States on May 9, 2025
Worked as intended. Not sure about the long term durability of the welds holding the nut in place. Worked for the 4 times I've used it.
Don
Reviewed in the United States on January 17, 2025
I had purchased one of these a while back. It works very well to keep the hitch tight. Simple to use. I bought another.
Plumbing Guy
Reviewed in the United States on April 29, 2025
Tightens up my 2” receiver bike rack nicely.
Tweetybird
Reviewed in the United States on April 11, 2025
This turned out ok but just be aware - the nut that is welded to the square flange was welded off-set slightly and the bolt wouldn’t go in at first - I had to grind a tiny bit off the edge of the flange so the bolt would go into the nut without damaging the first thread. Otherwise it works well - the holes in our hitch mount were large - 5/8” and 11/16” - this will NOT work with smaller holes. If you need to drill your own holes - you will need a 5/8” HSS bit to drill the hole.One other note - the hitch pin that comes with this is VERY stiff - we ended up using one we had because we just couldn’t get it to go on.Once on it works quite well and tightened our VERY sloppy bike rack and hitch mount up very well. Not a sound.
Jeff
Reviewed in the United States on August 28, 2024
Think I bought the wrong thing
Dave B.
Reviewed in the United States on August 17, 2024
Had to modify slightly to go in my receiver, which was a little odd shape, but was easy to do! Works great!
Brother J
Reviewed in the United States on March 18, 2024
This works well for stabilizing a 7" extension for a receiver hitch with a bike rack on it. After installation, there is no left/right play and no twisting. However it can still move up and down a bit (with a lot of resistance). This is unavoidable and expected due to the design. I was a little disappointed that a flat washer was not included: If you plan to install and remove it frequently, you may want to buy a 5/8" flat washer to avoid having the lock washer chew up your hitch.
Jonathan S. Robinette
Reviewed in the United States on October 29, 2024
This works really well for taking out the lateral movement of the bike rack, only does ok for vertical, would probably be fine if it was something lighter weight.
Recommended Products