Your cart is empty.
Your cart is empty.Product Description
Efficient Thermal Conductivity
The Thermal Pad based on silicone and a special filler outperforms generic and performance pads by far.
Filling the Gaps
Due to its low hardness and great compressibility, the thermal pad works as the perfect gap filler and bridges uneven surface and gaps without any problems.
Easy to Apply
ARCTIC's Thermal Pads are non-stick and can be easily removed and repositioned. Installation is child's play, making them perfect for beginners.
Safe Handling
The Pad does not contain any metallic particles, is electrically isolating and not capacitive. The handling is safe as contact with any electrical traces would not result in damage of any sort.
Joshua White
Reviewed in the United States on January 19, 2025
These are both inexpensive and good quality. Can't beat the price vs performance.
Noah
Reviewed in the United States on May 30, 2024
I have a 2 year old laptop that has a AMD cpu and the hard drive that it came with was bad. I didn’t buy it new I bought it from another person and that person I trusted but not anymore because this person failed to tell me that the hard drive was bad anyways I do build desktop computer’s and I repair laptop’s and when I got it it would not boot up so long story short the hard drive cable came off from the motherboard and you can’t solder the cable back onto the motherboard so luckily it has a m.2 pcie slot so I bought a 1TB m.2 and put it in the slot for it ssd and installed it and I put windows 11 on it and it runs like new and I found this heatsink strips and I put one on the side that would get hot and I did a stress test on the m.2 and it never got hot yes warm but not hot and I really put it under a very heavy stress test and with the heatsink strip it kept it cooled. I highly recommend this this product if your computer doesn’t have any heatsink for a m.2. I will buy again.
Tim Vinyard
Reviewed in the United States on January 11, 2024
Had to double up on these when replacing the cooler on an aging Titan X (cause I'm dumb and miscalculated the thickness I needed) but even when doubling them up performance was great.
J. Forward
Reviewed in Canada on September 17, 2023
How you like to meet you stay clear that's when I got mine and appeared to be all dried out and crumbly when I went to use it as another person mentioned... the only thing I can liken it to as a dried out piece of gum.
Lionel Lee
Reviewed in Singapore on August 31, 2023
Kept the ssd nvme temp constant below 60 °C, happy customer
Flo
Reviewed in Germany on August 20, 2023
Die Pads lassen sich leicht verarbeiten und sind relativ formstabil. Über die Wärmeleitfähigkeit kann ich mich auch nicht beklagen, ist nicht schlechter als die original Pads auf einer KFA² RTX 3070.
Bjorn bjornson
Reviewed in the United States on July 20, 2023
If you plan on using for the PS4 you will have to get 8 pieces cut about 10mmx10mm to cover the chips. If you want you can also cover the bottom side of the chips as well. Will need to plan out the cuts/pieces you need. the size 120 x 20 x 1.0 mm (1 Piece) will work just fine just ensure the chips are covered and not overlapping. Simple install opening up the ps4 just a pain. So do it right and worth while, new fan, pads and thermal paste. Seal it up and be done with it.
Glenn Rhone
Reviewed in the United States on July 11, 2023
These Thermal Pads are soft vs other type pads, are not sticky, or difficult to work with.
Dave Rentz
Reviewed in the United States on June 6, 2021
I'm not sure this specific version of the product would be the best choice for a PC's processor. But for the Raspberry Pi, it solves so many problems. I'm using an aluminum-finned radiator with hollow, oil-filled copper tubing, which runs through an aluminum heat-sink base. Pretty standard stuff, for the Pi 4B. The copper tubing happens to run directly over the ram. Unfortunately there is quite a gap between the two (1/16"). And, thermal pastes being (generally) non-adhesive; I didn't really want to mound up a glob of it...cause I really doubt it would retain it's shape for long. This pad, however, will hold it's shape indefinitely! I cut one piece to perfectly cover the RAM, a piece which bridges the CPU and the RAM, and even a narrow wedge-like piece to fit into the gap between the copper tubes. There is so much thermal contact with the heat-sink, I can be sure that I'm getting the full potential out of this cooling device. And the fact that it's non-conductive is very reassuring! The same can't be said for all thermal pastes on the market... This product is very versatile! It cuts easily, with an exacto or utility knife, or even scissors. It's not sticky, like glue is... But it can be made to stick, a bit, by simply pressing it into place. I'd say, if you work at all with electronics or computer repair/assembly, you can't go wrong having at least one pack of this on-hand. You'll find a use for it, I'm sure. And probably when you're in a bind, and nothing else will do.
Tairy Hesticles
Reviewed in Canada on March 26, 2021
Good quality product, but damn the pad sheet is extremely small to price ratio. Used it for my PS4, and didn't have any left. I won't be buying again for sure. It's expensive because of brand name. Next time I'll purchase an equivalent quality for a cheaper price. Perhaps get more for the money as well. Just a heads up to anybody that buys this.
Michele
Reviewed in Italy on April 24, 2021
Costano un po ma tengono a le temperature delle vram della mia 2080ti, le ggdr6 possono diventare molto calde. ho utilizzato questi thermal pad anche sul mio MacBook Air 2020 intel posizionati sull'heatsink riscontrando una diminuzione di 10 gradi quando lo uso per le videoconferenze meet , eliminando in questo modo il fastidioso rumore della sua ventola, tuttavia c'e da considerare che il calore si riversa tutto sulla scocca esterna in alluminio che diventa abbastanza calda, lo consiglio se in genere utilizzate il laptop su una scrivania
DL
Reviewed in the United States on April 22, 2021
Purchased the 1mm thickness for a thermal pads replacement for a Sapphire Nitro RX580 GPU. Turned out that they were way harder than the specs stated and I had to replace them. A loss of $12 and time.Pro:Came fast via AmazonCon:The declared hardness of this pad is 25 OO, which means they were supposed to be very soft. Normally most of the 1mm thermal pads would squish when replacing GPU thermal pads on a Sapphire RX580, as many others have stated on forums for various thermal pads - especially if using pads that are as soft as "25" declared hardness, from a reputable brand like Arctic. This Sapphire GPU is using 0.75mm pads and a 1mm squished would compress to 0.75mm, if they were truly "25" hardness. Turned out that these 1mm pads were very tough, in my opinion closer to "40-60" hardness. As a result the GPU die could not make proper contact wit the cooler and the GPU was throttling and shutting down.Replacing with 0.5mm pads from another manufacturer solved the problem and those pads, while also rated 25 hardness, were considerably softer than this Arctic pack...Neutral:- Despite being harder than the stated 25 OO, it's still a "soft" thermal pad. It came in an envelope. If it bends, one can unbend it, but during bending it can lose shape slightly.
Placeholder
Reviewed in the United States on October 9, 2020
I was scared to buy this. I did bought it. I need it for my ASUS ROG Strix GeForce GTX 980 Ti. I opened video graphic card. I cleaned them up. I removed old thermal pad and old thermal compound paste. I put new thermal pad on it. I put new Noctua NT thermal compound paste on the GPU. After done, It works. I have no problem with it. My video graphic card still is strong. Yeah I turned HIGHEST! No problem. No overheat or crash or anything happen since MAY 22, 2020 till now. NONE! I love this new thermal pad. Thank you!
Recommended Products