Your cart is empty.
Your cart is empty.Joshua Vandenbrink
Reviewed in the United States on March 1, 2025
This is awesome, and I wish I had them years ago. The Pi camera ribbon cable has a notorious problem of not working over distances greater than a foot or so. This take care of that problem! I am running two of these each on 12 foot long HDMI cables and the picture is great! Easy to install and highly recommend!
Justin
Reviewed in the United States on February 26, 2025
Tried a few cables and cant get this to work on my pi zero 2W
Matt
Reviewed in the United States on April 9, 2025
These are amazing! Bought 3 different ribbon cables before realizing they won’t work in long applications. Wish I knew about this before
Jake Edwards
Reviewed in the United Kingdom on September 9, 2024
The hdmi cable you use must have good shielding and individually connected pairs, cheap cables with no shielding won't work
Lupirite
Reviewed in the United States on August 23, 2024
I bought it thinking it was an adapter for raspbersy pr cameras, but I might use it as an extender
Loeffel
Reviewed in Germany on May 29, 2024
Anschluss war ohne Probleme möglich. Konfigurieren musste ich nichts. Die Kamera wurde trotz der Verlängerung ohne Probleme von OctoPrint erkannt und funktioniert genauso, wie ohne die Verlängerung. Man würde sich wünschen ein Gehäuse dabei zu haben, aber man kann nicht alles haben und dazu gibt es ja auch 3D-Drucker.
Hannes M
Reviewed in Germany on May 8, 2022
Flachbandkabel sind nicht gut geeignet zum Verlegen über große Distanzen und gehen schnell mal Kaputt.Mit diesem Adapter kann man einfach ein HDMI Kabel verwenden, was nicht nur robuster ist, sondern auch besser abgeschirmt.Nutze die Adapter mit HDMI Kabel für die Kamera des Raspberry Pi 4 vom 3D-Drucker und bin zufrieden.
Bloop McFloop
Reviewed in the United States on March 16, 2021
These turned out to be too good to be true, but that's not the fault of these devices, it is mine. These things appear to be well made and probably work great for what they are intended to be used for, which is not what I needed. But I don't give one star reviews for my errors. Buy with confidence! Just know that converting from HDMI to CSI-2 requires some logic and whatnot. These merely adapt from a CSI interface to an HDMI socket. Maybe I'll run it on my RPI4 to see if I get output, but being lazy, this review is likely about as far as I'm going to take it. Good luck!
Tim
Reviewed in Canada on February 10, 2021
Setting up a webcam to monitor prints on my 3D printer remotely with a Raspberry Pi and Pi camera V2. Initially set it up using a 30cm long CSI cable, which worked but the colors were washed out and the video was quite laggy.Remembering I had these CSI to HDMI adapters, I thought I'd give them a try. Worked right away - no configuration changes required. The color was greatly improved and the video was now nearly full-time. I presume that the long-ish CSI cable was picking up interference which was somehow causing the video issues.Very happy with my purchase!
YK
Reviewed in Singapore on August 19, 2020
Works well as described. Fast shipment. Received within 2 weeks.
Matt
Reviewed in the United States on August 13, 2020
Works well over all for my application. One thing I am trying to figure out is when paired with octoprint/octolapse it will not run in "usb" mode as is recommended for a pi-cam on octolapse. The pi-cam connected directly via the ribbon cable will, but these adapters wont.
Thomas J. Coyle III
Reviewed in the United States on June 4, 2020
I just received the CSI to HDMI Cable Extension Module and got it working with my new Pi 12 mp HQ Camera and the video quality is excellent.I made a mounting plate out of 1/8 inch thick polystyrene to the same size as the Pi 12 mp HQ Camera pwb (38 mm x 38 mm) and mounted it to the back of the Camera pwb with 6 mm standoffs and 2.5 mm x 10 mm hex cap screws. Before I attached the mounting plate to the Camera pwb I drilled a hole pattern that matched the camera Extension Module hole pattern and mounted the camera Extension Module to the mounting plate. Unfortunately the included CSI cable was too short to connect to the Camera CSI port so I substituted a 6 inch CSI cable which is a bit long, but works. I may purchase a 4 inch CSI cable in the future to take up some of the slack.In the future Arducam might want to include an optional mounting plate that matches the Pi 12 mp HQ Camera O&M and include 6 mm standoffs and hardware for the mounting plate. The Extension Module can then mounted to an appropriate hole pattern on the mounting plate.Update: I just bought a second CSI to HDMI Cable Extension Module and it works just as well as the first one!
Kenny L
Reviewed in the United States on June 3, 2018
One of my biggest worries for my project at first was how do I make a camera connection that's user friendly? Lucky for me that question was already answered and it led me here. It's as easy as hooking up the camera (twice). I was also wondering if the camera could be plugged and unplugged while the Pi was running and I'm happy to report that it can. If you try to take a picture with it unplugged raspistill just errors out with no further issues, plug it back in and it works!My only issue is I haven't found a case for the camera/adapter combo yet. That's not a problem with this product itself though. I've found that this product works seamlessly, without errors or quality issues, like it's not even there.
Recommended Products
![TECHTOBOX HDMI to DisplayPort Adapter [4K@60Hz] Uni-Directional HDMI Source to DP Monitor [1 Pack] HDMI Male to Display Port Female Converter for PC, Graphics Card, Laptop, PS 5](images/loading.gif)