Your cart is empty.
Your cart is empty.Product Description
Arlington CE2-1 Recessed Low Voltage Cable Plate, 2-Gang, White, 1-Pack. Designed for use with HDMI, coax, data, voice, and other low-voltage cabling. Cable scoop mounts directly to the wall with included drywall screws that match the plate cover. The non-metallic unit works as entrance or exit plates, protects your cabling from damage. Use the reversible cable entrance hood to run communications cabling as desired. Plastic construction is paintable for a complete finish to your project. To install use low-voltage mounting bracket, such as the LV2 by Arlington for a template to cut the hole and install bracket, fish wires behind wall surface through mounting bracket and entrance plate, attach cable entrance plate to mounting bracket, connect wires to electronic equipment (low-voltage brackets sold separately). Low-voltage mounting bracket is recommended for additional support, however not required complete installation. Reversible scoop plate is aesthetically pleasing and may be installed facing in or facing out. Made In USA.
From the Manufacturer
Arlington CE2-1 Reversible Double Gang Entrance Plate. Try Arlington's The Scoop, CE2-1, of reversible non-metallic, Double gang entrance hoods. They not only protect cable, but deliver good looks and installation versatility.
WSK2010
Reviewed in the United States on July 28, 2023
Sturdy and good looking wall plate that can help to hide wires or as a "bundled wires" or heavy electrical cord "pass-through" option. I installed an AC port on our conversion van in order to supply shore power. This port had a heavy duty, reinforced pig tail attached with an integral female plug on the end. We used this wall plate to hide the opening on the inside of the wall where this plug came through. It worked perfectly and provided a very professional and attractive finish to our project. The fact that it's heavier and thicker than a standard wall plate was much appreciated. Good quality!
Steve b.
Reviewed in the United States on December 14, 2023
To cover interior hole from installing Norco plug on enclosed trailer. Looks good and opening just big enough to slip a plug through .
Jessica Tarrant
Reviewed in the United States on August 17, 2021
Helps you keep organized with cables not all over the place coming out from the walls, especially in a busy office where you may have off and on high volume of customers in and out of the office which makes it look professional.
Mark Adams
Reviewed in Canada on February 10, 2021
Ive have been using these in my installs for years. They are simple, easy, and clean. I like that you care reverse them based on customer preference. Plenty of room to get what you need through it unless you are running a massive amount of things. The only con is the slot head screws, I wish they were something that grabbed better.
rtumali
Reviewed in Canada on February 23, 2017
The product appears to be of heavy quality although I have not had a chance to install it. It arrived on time as specified. I have been looking for this kind of product for a long time, have checked Home Depot, Rona, Lowes, you name it and have not found a reasonably priced item like this one. Great value
Blake Moore
Reviewed in Canada on November 23, 2017
Great product for cleaning up holes in walls. Compared to what you'd pay in a big box store these covers are a steal.
Kim Chiverton
Reviewed in Canada on April 11, 2017
Easy to mount - quickly cleans up cable port.
Red Ridge Global
Reviewed in Canada on November 1, 2015
These work great and you can't beat the price.
Matt
Reviewed in the United States on July 28, 2014
This is the third one of these I've used in two different houses. It looks good and has plenty of room to feed cables through. It came with two different lengths of screws, which was FANTASTIC. I needed long ones for my installation and it was great to have them right in the bag. It's white, but not exactly the same white as other plates. Different manufacturers never really match, it seems.
Ryan M. Patterson
Reviewed in the United States on March 5, 2013
I'm a professional TV installer, and have tried many different wall plates. I've settled on this plate as my go to wall plate for a few key reasons.PROS:1. Flexibility - Can be flipped to have the hood sticking out into the room (good for hiding a ton of big bulky cables), or flipped to have the hood sticking inside the wall for a nice clean recessed look.2. Price - I do a lot of installs. If you buy these in bulk you can get them for under $1.75 per unit.3. Hardware options - they come with two sets of white screws, one short one long. Helps out on deep walls or doubled up drywall.4. Paintable - unit is paintable to match any existing wall plates or room preferences, it's a Matte finish so holds paint well unlike some of the other wall plates.CONS:These are only minor complaints, making it a 4-star instead of 5-star rating.1. Color - it's not "true white" like some of the other plates, it's more of a slight off-white it's paintable, so not a huge deal, but an extra step if you are picky and want it ot be a direct match.2. Mounting screws are flathead, not Phillips. Again, when doing a lot of installs, every little shortcut helps. Have to use a manual flathead to screw in the long screws, would be nice to be able to use my drill with a Phillips head.You will also want to purchase a single gang low voltage mounting bracket that screws in with tabs and grabs the drywall from behind, then lets you screw this wall plate into it. That is assuming you are cutting a new hole in an existing drywall (old work bracket) for this type of install. Here's a link to a good option for that.http://www.amazon.com/Arlington-LV1-1CS-Voltage-Mounting-Bracket/dp/B000UEAJWU/ref=sr_1_1?s=hi&ie=UTF8&qid=1362499232&sr=1-1&keywords=low+voltage+wall+plateThe other plate I have used quite a bit in the past is the DataComm plate, this is a great looking plate, but not as many options to move the plate around, and it costs about a $1 more. http://www.amazon.com/gp/product/B00193U3O0/ref=noref?ie=UTF8&psc=1&s=hi
Roger
Reviewed in the United States on March 4, 2013
As a licensed Audio/Video installer I use a lot of these plates, I like the fact that they can be used four different ways, they are well made, paintable and inexpensive if bought in bulk. They are a real time saver when installing them on the inside of an external concrete wall. Since they can be utilized where the "shell" can be on the outside of the drywall it eliminates the need to cut them to fit up against the concrete block. They are flexible which comes in handy if you need to cut them plus they come with long and short screws, another plus. They make it super easy to run lots of different type of cables through one plate. I recommend these to anyone.
Joeyoung25
Reviewed in the United States on November 20, 2012
The quality of this plate is very good. It is not flexible and cheap plastic like most plates. I wish all the plates in my house were made this good. I also like that you can install it recessed or not. I installed mine below my wall mounted TV so all my wires are hidden and it looks more professional this way. I really like how it looks. You will also need to have either a low voltage box or a bracket in the wall to mount this plate to.
J. Haley
Reviewed in the United States on May 11, 2011
I used this wall plate to feed HDMI cables from my home theater system up inside the wall to my wall mounted TV. Like other reviewers I liked the fact that it was reversible. It allowed me to turn the cowling part of the cover to the inside of the wall behind the TV as there was not much space behind it. These covers will also work with standard plastic workboxes. In my case the workboxes were already in the walls so I did not need the mounting brackets.
Recommended Products
