Your cart is empty.
Your cart is empty.Product Description
A-Team Performance Intake Manifold 102mm Throttle Body Sheet Metal Fabricated EFI 15° Throttle Compatible W/ Chevrolet Chevy GMC Pontiac LS LS1 LS2 LS6 Black
100% TIG Welded Aluminum Hardware Included 3mm (1/8") Thick T6061 Sheet Aluminum Construction Black Fuel Rails Fuel Crossover Line Intake is about 2" taller than stock
This intake compatible with Cathedral Style LS1 LS2 LS6 4.8/5.3/5.7/6.0 Heads.
Features:
- Black Intake Manifold, Black DRIVE BY CABLE Throttle Body, Gaskets, Hardware, Black Fuel Rails, and Fuel Crossover Line.
- Compatible with CHEVROLET SMALL BLOCK V8 GEN. III/IV (LS-BASED) 4.8 L / 293 in3 (LR4) 5.3 L / 325 in3 (L33, L59, LM4, LM7) 5.7 L / 346 in3 (LS1, LS6) 6.0 L / 364 in3 (LQ4, LQ9, LS2)
Dakota Schaffer
Reviewed in the United States on November 27, 2024
Beautiful intake and built extremely well. Zero issues with built quality. But it will not clear truck accessory brackets. I have used this intake in the past on trucks with LS swap and it fits terrific if you are running different accessory brackets such as ict billet or nicecnc. But will not clear factory alternator/ power steering bracket. Must be changed.
My opinion about this product
Reviewed in the United States on September 6, 2021
The media could not be loaded.
Ogden fab works
Reviewed in the United States on February 28, 2020
Haven’t run it yet but it’s going in my class 1450 race truck so it’s going to get some serious abuse,I will be sure to leave a full review after the end of the race season
Manny
Reviewed in the United States on July 25, 2019
Make sure you order the correct throttle body electric or cable, Per the instructions you will also need to reprogram your ECU to specific manifold you order what this reprogram settings are for this intake you will need to work out on your own but be careful get it wrong and damage to engine will accrue. This is also designed to work with aftermarket modified engines. Exactly what modifications it is designed to work with your guess is as good as mine. All I can find is mid to high horsepower what range they consider mid to high??? From what I could tell there is no spot to connect the MAP sensor or PVC so some modifications to sensors and other maybe needed. Do not order this incorrectly, getting assistance and correcting the error is impossible and if you decide to just return it you will be charged 25% ($127.25 plus the shipping both directions) restock fees if you need to return it because it was not correct for your application even when there reps tell you it well work.
TheZivo
Reviewed in the United States on May 9, 2019
Have not installed this intake yet, but I was pleasantly surprised with the build quality, of the intake and the throttle body.Vacuum holes are threaded wellIntake runners line up perfectlyWelds look solid, tested with water for leaks, and it held perfectly.Whole thing is deburred as well including the throttle body.I will update when I get it installed, and the car running.
R Pelly
Reviewed in the United States on August 1, 2018
For the price its hard to beat. Intake is on a boosted 364 ls1 w 317 heads; it fits. You are going to need addition fuel line parts and possible a regulator. The build quality is nice and the welds are clean. The throttle body specs are almost identical to fast 102mm at half the price. Their is room for improvement; could use a pressure sensor on the back or bottom like stock ls1 ls6 intake. Clearance may be an issue but not by much with ws6 hood; could use spacers to gain addition inc w hood. I will update in a few weeks when i get it fired and see what it sound like. The visual impact is nice popping the hood.
Dewayne tootall
Reviewed in the United States on July 6, 2018
Thank you sending my product in a timely manner and a great finish
Hil.Min
Reviewed in the United States on March 22, 2018
The intake does not come with throttle bracket as pictured in the ads. The fuel rail does not come with cap. Those are extra.
Recommended Products
$130.00
$ 54 .99 $54.99
$169.95
$ 72 .99 $72.99