Your cart is empty.
Your cart is empty.Product Description
Universal Vehicle Wheel Clamp & Magnetic Adapter
Achieve accurate camber and caster adjustments with this essential wheel clamp. Fits 11-25" rims, features a chrome-plated magnetic adapter, and adjustable pins for professional 3D alignments. Built for precision and durability with easy clamping adjustments.
Wheel Clamp Adjustment Knob
Conveniently extend and retract alignment wheel clamp with adjustment knob when attaching to a vehicle's rim.
Adjust from 12" to 25" Max
Compatible with most rim sizes. Can be extended to 30" max with the AutoSolo wheel clamp arm extension kit.
Magnetic Adapter Plate
Perfect companion for any AutoSolo gauge and level tools for wheel alignment that have a magnetic end.
Hunter Style Pin Locators
Safely attach to any rim with ease as the pin locators adjust to the curvature of the rim as the clamp tightens.
Levi Houston
Reviewed in the United States on May 6, 2025
works great, be careful to align the pins that clamp on the outside of your wheel, if your wheels are aluminum you can nick/ding them. I put a small piece of painters tape where the pin contacts the wheel to add a layer of protection.
Kunde
Reviewed in Germany on May 29, 2025
top Produkt, sehr hochwertig verarbeitet
ROLANDO L. RODRIGUEZ
Reviewed in the United States on May 28, 2025
Work great
nancygail
Reviewed in the United States on May 14, 2025
Well built, packaged well to prevent shipping problems. We took my car to local repair shop who said they could do a 4 wheel alignment on my 2011 Hyundia Santa Fe gls. Had it on the ramp for 20 minutes when the shop foreman came in and started telling us there were problems and took my husband out to talk with young man doing the alignment. The alignment computer locked up wouldn't work due to sun on the rear mirrors so laser couldn't work. He didn't seem to have any experience doing 4 wheel alignments and didn't know where to do it on my car. So we purchased these and they worked great. He watched a few you tube videos on the use. So if you want to do your ownthese work well.
zadih
Reviewed in the United States on May 10, 2025
These held onto my truck tires very well with little effort on the the turn knob.
R. K.
Reviewed in Germany on March 16, 2025
Der Artikel ist von überraschend guter Qualität (trotz eines Fertigungsfehlers an einem Magnethalter). Die fünf Sterne gib's vor allem auch wegen des guten Service nach dem Kauf bei der Lösung des Problems mit dem Magnethalter. Total unkompliziert, sehr freundlich! Der Verkäufer ist sehr empfehlenswert.Der Artikel (im fehlerfreien Zustand) verdient alleine auch die fünf Sterne, für den Hobbybereich auf alle Fälle geeignet und optisch vom Profigerät kaum zu unterscheiden. Der Halter ist spielfrei gelagert und die Buchsen sind sehr genau gearbeitet. Ich hoffe über die Zeit bestätigt sich der erste Eindruck. Ein erster Einsatz steht noch aus.
Luc
Reviewed in France on February 20, 2025
À partir du moment que la roue et le roulement n'ont pas de voile, le support permet de faire un alignement pour le parallélisme avant ou arrière. Pour ma part j'ai fixé un laser sur la platine. Pour moi ça fonctionne. Pour être équipé comme un pro il faudrait deux articles. Ne pas oublier de mettre des platines de ripage pour permettre à la roue de bien glisser lors du réglage. Pour ma part j'ai pris des planches à découper et je mets de l'huile entre les deux. Donc deux planches d'un côté et deux planches de l'autre et me voilà équipée de plaques de ripage.
Bernard Petersen
Reviewed in the United States on April 22, 2025
I was aligning a 1940 fat fender Ford and had to remove the tightening knob for clearance in the wheel well. Other than that it worked well.
J.R.
Reviewed in the United States on August 16, 2024
The first arrived poorly packaged and damaged, the seller stepped up and replaced it immediately. The replacement was well packed. During manufacturing, shipping, and anytime this is bumped or dropped, the frame could get twisted out of square. Try not to drop it, treat it like the precision tool it is. Before using, check it on a known flat surface. I used my glass top range. Set it pins down. If it rocks, loosen the 4 large Allens on the rails, rock it until square, tighten and recheck. Also, just like a real alignment machine, you have to compensate these everytime you mount them. I know, it's common sense, but obviously not. I saw a couple review dings about exactly this. This seems almost as well made as the hunter clamps I've used at work. I'm considering buying 3 more to "hang once" and square the entire car at one time. This is perfect for trackside camber checks and adjustments.
Long Island Bubble
Reviewed in the United States on March 6, 2024
The media could not be loaded.
Dan J
Reviewed in the United States on November 6, 2024
For home shop work, this is very nice and affordable equipment. I had been using hub adapters to attach my caster/camber gauge (had to fabricate several adapters to accommodate various aftermarket wheels for hub attachment).This wheel clamp eliminates the need for hub adapters. Wheels like the Cragar shown in the pics have a hub cap that is held in place by a fastener on the backside (wheel must be removed to remove the hub cap). Using the AutoSolo wheel clamp eliminates the need to remove the wheel and hub cap to do an alignment.
Customer
Reviewed in Canada on March 13, 2021
I haven’t used my alignment wheel clamp. But I’m sure it will serve me well. It seems to be well constructed and ease to use.
Recommended Products