Your cart is empty.
Your cart is empty.Product Description
Dan Cochran
Reviewed in the United States on May 30, 2025
Yes, this is worth it. I have Over sized 40" tires on my x3 with the superatv lift so trying to just use my eye to line things up was a lost cause. This made things a lot easier . I could have done it with just me using this, but my wife helped and we had the front toe and rear toe setting toe in 1/4 inch quick. the other Part i did like is there adjustable. As far as any cons I would say it would be the digital level, it was off a little when checking it with my framing level. But for the price of the kit I'm not going to complain.
DMZ
Reviewed in the United States on May 23, 2025
Upon opening I noticed that the toe plate is fairly well made with thick steel. The electronic gauge does not work in terms of turning it on and off and all the other buttons do not work. The top of the toe plate where it gets bolted on to the hub is too wide for a Mazda.
DeSoto Dan
Reviewed in the United States on May 20, 2025
Great tool for home or at the track, simple to use, stores neatly, good value!
Tim Elder
Reviewed in the United States on May 11, 2025
Simple but effective. If you've used strings and jack stands and whatever else shade tree mechanic methods, you'll appreciate the ease of use these bring. They worked great to set my camber and toe, if you were ambitious I think you could use them to find your caster angle as well.
Ryan Walsh
Reviewed in the United States on May 10, 2025
Worked really well.
Ontario feeder defender
Reviewed in Canada on February 1, 2025
This simple kit really helps get your car back into a drivable state so you can get to a proper alignment shop. I recommend getting a steering wheel holder as well.To get even better results I jacked each control arm up to put weight on the suspension as it would be on the ground. Depending on your car there can be a fair bit of geometry change at full droop.
Michel R.
Reviewed in Canada on January 30, 2025
Outil solide, je recommande.
Florent Pedneault
Reviewed in Canada on January 21, 2025
Precis
S. Mayo
Reviewed in the United States on April 27, 2025
measures toe in/out with precision. fits 5 and 6 lug hubs. I also used it to measure camber and caster. Just cut some 4x4 blocks to fit under the lower control arm to space the hub center the same as with a wheel mounted. rotate the tool 90* to vertical and you have standard camber measurement. do the 20* turn each way for caster after zeroing the level box at each extreme. BTW, the level box is not that accurate - about 0.1* and screen washes out badly in sunlight. I used a similar level box with LCD display, not LED, to get my measurements. If your driveway is not level, just zero off the rear wheels with a piece of angle. Rear wheels are 90* with solid axle, so all other measurements are relative to that.
Dave22
Reviewed in the United States on April 18, 2025
Came very well packaged. Plates are sturdy and straight. The tape measures are accurate, I checked them against a Stanley. Used on my Camry, it already paid for itself.
Big Felt
Reviewed in the United States on April 18, 2025
Couldn’t get it to work
Recommended Products
$20.99
$ 10 .99 $10.99