Your cart is empty.
Your cart is empty.Product Description
EASY TO USE, NOT MUCH EXPERIENCE NEED!
- DITKOK PORTABLE BAND SAW TABLE is specially developed for the convenience of band saws, it is applicable to band saws of various brands and models.
- The bandsaw portable table is simple and easy to use, not only EASY for professionals but also for DIY people and hobbyists.
- Complete accessories, detailed instructions and installation video will be supplied to get you free from installation bothering.
- Better your band saw and simplify your work. Come and get it!
SUITABLE FOR VARIOUS BRANDS AND MODELS
Based on experimental test, the following band saw models are suitable for use with our band saw table portable. In addition, DETAILED installation introductions for various band saw models are included in installation manual.
- For Milwaukee Deep Cut Model #'s 6230, 6230N, 6232, 6232-5, 6232.51 6232-55, 6232-6, 6232-6N, 6232-8N, 6236, 6236N, 6238, 6238-8, 6238N, 0729-20, 0729-21.
- For Dewalt Deep Cut Model #DWM120, DWM120K, D28770, D28770K, DCS374B, DCS374P2.
- For Harbor Freight Bauer Deep Cut #'s 63763, 63444, 62800, 1678E-B.
- For Home Depot WEN Brand #'s 94396.
- For Makita Deep Cut Model #'s 2107F, 2107FK, 2107FZ, XPB02Z, BPB180Z-18VOLT.
- For Bosch #'s GCB10-5.
- For Grizzly Tools Deep Cut Model #'s G8692.
Good Bearing Capacity 220 LB
Stable Triangle Structure
The triangular-shaped table legs are in line with the mechanics. The legs of the bandsaw portable table are made of iron plate, which ensure the stability and weight-bearing capacity of the table from the design structure.
Quality comes from details
Amazing Load-Bearing Capacity
- According to the repeated experimental test, the portable band saw table stand made of solid thick iron is durable enough to withstand a weight of 220 LB. This means you can use this portable bandsaw table mount to cut most metal materials without worrying about weight bearing and safety issues, allowing you to work more safely and efficiently!
- 4 locknuts will be provided to eliminate the hidden hazards of loosening due to the cutting vibration, simplifying your work while protecting your safety.
- Good material of the product, high quality and sturdy thick iron.√
- High quality material of accessories, high quality hard metal. √
- Solid product structure design, triangular-shaped table leg design. √
- Locknuts, no worry about the safety hazards caused by cutting vibration. √
Easy to Control the Band Saw
Precise Cutting
There is a groove on both sides of the portable band saw table for installing the miter gauge to better free your hands.
Simplify Your Work
Thoughtful design, free your hands
Worried about not having extra hands to control the chainsaw while using this product?
No need , a strip will supplied to control this band saw table for bauer, you can use both hands to hold the cutting material firmly when cutting, focus on the cutting work itself, no distraction to operate the portable bandsaw table, simplify your work, free your hands and protect your safety!
- Easier to use √
- Free your hands √
- Work more efficiently √
- Better protection for your safety √
G. Howell
Reviewed in the United States on August 17, 2024
I don’t think that the company that makes this saw table ever made a prototype to evaluate their design. There were just too many modifications that I had to make to use it. Three screws stuck up from the work table causing the material being cut to jam while being slid into the saw blade. 1) One of the two holes that mounts a Dewalt saw to the saw plate needed to be counter-bored deeper to allow for a smooth work table. 2) One of the screws securing the work table flange needed an additional washer so that it sat flush. 3) The bolt that secures the saw plate to the table is a design weak spot (risk of being stripped). So, I ground the concave ridge off the top of the bolt to get the maximum amount of thread to engage with the thin threaded tab on the work table. Then I used two additional washers so that the bolt wouldn’t stick up above the table’s surface. The table is supposed to accept a generic table guide. I had to grind the front edge of the frame to get the guide to sit flush with the table. I had to grind the back edge so that the guide wouldn’t jam when 1/8” of the material was still uncut.
2ndEmpireMedia
Reviewed in the United States on March 7, 2023
i ordered a swag unit and it turned out to be for a different saw than mine then upon searching this came up.IT COSTS WAY LESS and ITS POWDER COATED...the swag is not. its raw steel and sharp as hell ( try not to slice yourself putting it together! )this thing is identical in form and function in all areas but one where it beats the swag. its got a plate mount with one know removal for quick blade changes.Could not be happier. one of the best buys ive made so far this year
J. Stocker
Reviewed in the United States on December 26, 2023
Cheaper than other brands but very solid. Using DeWalt portaband with this stand and it works so well!Super accurate!
Jason
Reviewed in the United States on November 25, 2023
Really great and sturdy build quality for the price! Unfortunately, for some reason, they decided to drill the two mounting holes used for a DWM120 at a slight angle instead of in line. This means that the bandsaw blade is always at a slight angle which makes trying to get straight cuts frustrating.
David Donovan
Reviewed in the United States on November 2, 2023
Love the quality, works great with my Dewalt!
LP
Reviewed in the United States on January 28, 2023
Very heavy duty
John S
Reviewed in the United States on December 28, 2022
Pro:Heavy duty, well built. Good value. Was going to go with a swag, but this was a little cheaper, and powder coated with no additional charge. Put it together in about 10 min.Con:Only thing I can think of, powder coat on table top got in the threaded hole for the large threaded knob. Had to clean up the threads with a tap.Very satisfied!
Richard C. Weems Jr.
Reviewed in the United States on November 4, 2022
Awesome product. Paired with the dewalt band saw and it’s perfect for what I need in the home shop and for knifemaking.
Recommended Products