Your cart is empty.
Your cart is empty.Product Description
Baomain ANL Fuse Holder Kit - Protection for high current systems
Current selectable
Available Current Ratings:
- ANL-300A for current picture showed.
- The stamped steel design ensures clear and durable current rating identification.
- More current optional: 30A, 40A, 50A, 60A, 70A, 80A, 100A, 120A, 150A, 180A, 200A, 250A, 300A, 350A, 400A, 500A
- Note: Always confirm the correct amperage rating for your specific application before installation.
Key Features:
- 24K Gold-Plated Terminals - Ensures maximum conductivity and corrosion resistance for stable power delivery
- Universal Compatibility - Works with 0/2/4 AWG wires for car audio, power inverters, off-road lighting & marine/RV systems
- Vibration-Resistant Design - Secure screw-down terminals prevent loosening
- Easy Monitoring - Clear viewing window for quick fuse status checks
Ideal for:
- High-power amplifiers;
- Power inverters;
- Off-road lighting systems;
- Marine/RV electrical systems
Effortless Installation with Standard ANL Size
Our ANL Fuse fits standard holders for quick, easy electrical system setup. Ideal for pros and DIYers alike, it gets your setup running fast.
Perfect Dimensions for Seamless Integration
- Holder: 123 x 37 x 38mm (4.84" x 1.46" x 1.50") – Compact yet sturdy, fits various enclosures.
- Fuse: 80 x 19 x 8mm (3.1" x 0.75" x 0.31") – Precision - sized for easy insertion and reliable performance.
Fusing Characteristics
Breaking Capacity Test Parameters:
- TESTING CURRENT: 150% of rated current; BLOW TIME LIMIT: Typically withstands for over 1 hour in lab tests
- TESTING CURRENT: 220% of rated current; BLOW TIME LIMIT: Typically withstands for over 60 seconds in lab tests
- TESTING CURRENT: 250% of rated current; BLOW TIME LIMIT: Typically withstands for 0.8–10 seconds in lab tests
- TESTING CURRENT: 400% of rated current; BLOW TIME LIMIT: Typically withstands for 0.2–2 seconds in lab tests
Important Notes:
- Performance characteristics may vary depending on：Installation conditions；Ambient temperature；Ventilation factors
- For fuses rated above 200A:Continuous operation at full rated current is not recommended
- Maximum permissible load is determined by:Wire gauge capacity；Terminal temperature limits；Environmental conditions
- Safety Notice:Always consult a qualified electrician when designing high-current circuits. Actual performance may vary based on specific application conditions.（All specifications based on:Standard laboratory conditions (73±41°F/23±5°C)，Proper installation per manufacturer guidelines）
Installation Schematic（Mounting diagram for reference only, actual product not included terminals）
Why Choose Our ANL Fuse Kit?
- Enhanced Conductivity - Gold plating reduces resistance for better power transfer
- Performance protection - Zinc alloy fuses with precise amperage ratings
- Safety-focused design - Insulated cover prevents accidental contact
Features
ANL Fuse Holders
This ANL fuse holder is transparent cover and base design, makes it easy to identify which fuse need to be replaced when fuse blows without removing the cover.
0/2/4 AWG
The terminals of this car audio fuse holder is M8 stud design, can be used with 0/2/4 gauge wire lugs for connection, which enables the wires to be thick and safe enough to handle large amperage current.
Gold Plated
The contact of this fuse holder and fuse are gold plated design, which effectively enhances the conductivity and corrosion resistance performances of holder with fuse
Wide Application
This fuse block aims to protect the vehicle and device from damage of overload, suitable for all kinds of new energy vehicles, electric vehicles, forklifts, special vehicles, car air conditioning, car audio, welding machines, etc.
S. Deneve
Reviewed in the United States on January 5, 2025
Used this as part of my Big 3 alternator upgrade
Frazier
Reviewed in the United States on January 1, 2025
Upgraded the Controller, solenoid, and switched to Lithium. This fuse block was just what I needed. I would buy this again if I needed one without hesitation.
Lydia
Reviewed in the United States on September 15, 2024
Ya know, it's a fuse holder.. does a good job of holding the fuse.. as long as it keeps doing that, I think we'll be just fine..
Adam Cook
Reviewed in Canada on August 23, 2024
Overall, it's a good quality fuse block, my only beef is that the lid is a "snap on" type, rather than one that screws down. When I received it there was a silicone seal missing on the back of the unit, after contacting the company directly, they sent me 4 new seals very quickly, for having come all the way from China!
D. R. Gamble
Reviewed in the United States on August 18, 2024
Bought this ~6 years ago, installed it in my camper van and it still works as good as the day I got it.Highly recommend this!
drm
Reviewed in the United States on May 25, 2024
very easy to use and install. it seemed very well built i had no problem with it. very easy to see through to see the fuss.
Chuck(PGCF)
Reviewed in the United States on February 6, 2024
I ordered 2 of these to fuse my Aux battery system in the Overlanding Jeep JKU. One is installed under the hood, and the other is installed in the rear cargo area of the jeep. The connections are strong. there are 3 mounting holes on the main body of the fuse block. The cover comes off easy when needed. So far the covers have not came off unless I was meaning to take them off. In other words they shouldn't just fall off on their own. So I have them in 2 different harsh environments. I will update if I have any failures.
Randy
Reviewed in the United States on December 30, 2024
Looks good
Jason Bauzá
Reviewed in the United States on January 18, 2023
I do like the ANL better than the cylinder type. I have went through several cylinder type fuse holders. They keep cracking and falling apart. The last time, I had no idea what was going on. My amp would cut in and out until it finally died. I had 12 volts back to the amp so I assumed the amp died. I replaced the amp and the new one did not work. Again, I measured 12 volts. I started tracing the power wire to find that the gold fingers holding the fuse in place were breaking, barely making contact with the fuse. I replaced it with this ANL fuse and holder and my old amp came back to life.
Peter willick
Reviewed in Canada on September 1, 2022
Small and compact
Johny
Reviewed in Mexico on June 23, 2022
se ve de buenos materiales y buen acabado
Raul ra
Reviewed in Mexico on June 20, 2019
Muy buenos materiales de construcción del mismo
Loner MX
Reviewed in Mexico on February 27, 2019
Tardó un mes en llegar y tuve que comprar otra opción mientras tanto... Gasté lo doble.
Recommended Products