Your cart is empty.
Your cart is empty.Product Description
Package included the battery and complete tools
------------------------------------------
What you get:
- 1 Battery for iP 6s
- 1 Manual and Seal
- 1 Suction Cup
- 1 SIM Eject Tool
- 1 Plastic Spudger
- 2 Opening Tools
- 2 Set Adhesive Strips
- 3 Screwdriver (Pentalobe, Slotted, Phillips Size)
Welcome to Uowlbear.
We are a professional factory in producing cell phone batteries.
We always insist on provide the high quality batteries. High quality IC conversion rate improves the utilization of the battery capacity.
Uowlbear cell phone battery tested strictly by professional machine for 3 times before shipping. You can buy the Uowlbear replacement battery with confidence. You will get a high capacity battery from us. Uowlbear battery will brings your phone a new life!
- We also provide installation video. You can watch it before replace the battery
- Uowlbear High Capacity Battery for iPhone 6s
- Compatible Models: A1633, A1688, A1700
- Battery Capacity: 3500mAh
- Voltage: 3.82V
uowlbear 3500mah High Capacity Replacement Battery
Perfect Fit for iP 6s
Replacement Battery for iPhone 6s.
uowlbear IP6S replacement battery is brand new, 0 Cycle and over 900 charging cycles.
The circuit protection system ensures your battery is protected against over-loading, over-heating, over-charging,and short-circuit, More reliable and safer!
104% More Power!
Uowlbear Battery is 104% higher capatity than original.
Reduce the times of charging the battery per day.
More battery capacity, more time to use your phone.
High Quality IC Chip
uowlbear battery is built in high quality IC chip. Dual IC design ensures that your battery won't fail under any circumstances and give your cell phone super protection.
Note:
1. We strongly recommend you to watch the installation video before you replace the battery. After watching the video, you will find that it is not very difficult to replace the battery.
2. Before disassemble your phone, discharge the battery below 20%. A charged lithium-ion battery can catch fire or explode if accidentally punctured.
3. If you are unable to turn your phone on after installed, please reinstall the ribbon cable, check its connector and clip it hard. Next, charge your phone for 20 minutes or longer. Then try to turn on your phone once again.
4. If your phone keeps rebooting and blinking apple logo or can’t hold a charge. Maybe the ribbon cable does not connect well. Please reinstall the ribbon cable, check its connector and clip it hard.
Eric Neel
Reviewed in the United States on September 19, 2024
Recommended
Chahad Rfai
Reviewed in the United States on September 14, 2024
After changing 100Use the battery for two hours, it becomes 15%.So bad quality
Catharine Colon
Reviewed in the United States on August 28, 2024
Easy to replace but did not get enough of an increase in battery life to make it worth the replacement
Ravinandan Sah
Reviewed in the United States on August 13, 2024
This battery is great. I could easily installed in my iPhone and it is performing pretty well.
Gopal
Reviewed in the United States on June 18, 2024
seems battery is good for one month and then started swollen. waste of money
Jungle buyer
Reviewed in the United States on February 7, 2024
But for my iPhone 6s neither the included instructions nor the video included instructions for all the adhesive strips and case seal that were to be used. So I just did what appeared to be the logical thing to do. Hardest part was getting the supper sticky battery adhesive strips on and getting the electrical connector cables plugged back in wasn’t easy. Be prepared to use a bright light and magnifying glass to better see what to do with those tiny screws you will deal with. But over all I give the battery, installation process and performance so far 4 stars and a 👍
Terri
Reviewed in the United States on April 12, 2024
Battery over heats when charging And just using the phone. Also charge doesn’t last long.
Recommended Products