Your cart is empty.
Your cart is empty.Product Description
This carbon fiber cross bar is designed to fit into the motorcycle front fork stem. The fork stem mounting base made of 6061-T6 aluminum alloy material with CNC machining and iii grade hard anodized surface for durability and reliability in the most demanding environments.
The mounting base of this handlebar extender suitable for fork stem hole center distances from 60mm(2.362'') to 105mm(4.133''). To be compatible with motorcycle front fork stems of different specifications.
Easy to Install. Adjustable design, it is convenient to adjust the cross bar to your most comfortable height and angle.
Suitable for mounting various application equipment such as motorcycle phone mount, navigation, LED light and action camera on it.
Vicious cycles
Reviewed in the United States on September 23, 2023
Ive got a ton of Brcovan/kewig products, and this is the same high quality that every other product they have is.I haven't quite figured out how i wanted to use this just yet.Ideas:A handlebar for my 2 yr old to ride around with me on our minibikeA handlebar for my 2 yr old to be able to ride around with me on my Harley (will require a seperate mounting solution)A Magic arm mount for the front or rear of my harleyI think the options of how to use this, is nearly endless.The materials used are top notchOverall great product for whatever use you may find for it.
Warlord Commander Mike
Reviewed in the United States on September 13, 2023
These fit on very easy and hold up great and i even attatched two side mirrors to them. They look super cool.
Dave W.
Reviewed in the United States on September 1, 2023
This actually seemed promising because I yet have to find something that works with my bike. The handlebars have no round spot on it to put a phone.This is to hook up where the bars are mounted and looks cool. Unfortunately the bolts I pulled out of the bike are much larger than what will go through the mount. The spacers for the bike are too short and too small in diameter for the bolts to the bike.Some customizing is going to now be needed just to get this on. I have been working on this now for about 2 weeks with no luck for spacers that fits in the area of the bolts and yet will alow the bolts to be tightened without collapsing the spacer.Not sure this one will get done now. Hitting a brick wall.This is built quite well and I also like the carbon fiber bar. If anybody has an idea please let me know.
Andrea
Reviewed in the United States on November 6, 2023
Really nice looking bar. Super lightweight, comes with screws and allen key. Also you can adjust the angle that you want the bar to sit.
Tallen
Reviewed in the United States on October 3, 2023
This item is accurately represented in the description and photos. I was looking for a solution to put a phone mount on my bike with clip ons. I had fabricated a few things, but just wasn’t happy with the outcome. Although I have clip-ons my bike (Moto Guzzi Racer), it has the same upper triple tree that a standard bike has with holes for a normal handle bar clamp. With a few spacers to clear the triple tree nut, I got this to mount up perfect. Basically it provides a bar to mount accessories. It rotates forward and backward to adjust to where you want. I found a nice low profile phone mount to go on it so everything is nice and compact. I may cut it down a little as I don’t intend to mount anything else and it should be easy enough to do as everything comes apart. Great product, well built and provides a great solution for my issue. Thanks for thinking out of the box and making this mount!
ratufa
Reviewed in the United States on October 26, 2023
I finally decided that it's time to convert to a mounted GPS on my dual sport instead having to stop to pull my GPS out of my backpack or pocket to check directions. I use a cross bar on my mountain bike for bikepacking, and it's also great for securing small loads without interfering with steering or brake/shifter cables. As a Vine Program participant, I received this motorcycle cross bar in exchange for an unbiased review.Unboxing the bars, the CNC machining appeared to be of high quality and I appreciated the two sizes of stainless steel bolts and extra spacers. The powder coat had small chips in a few spots, but you had to look very closely to see them. With a dual sport parts tend to get chipped or scratched over time anyway. I personally prefer an anodized finish, but it's not a dealbreaker. The sliding bolt position, spacers, and ability to easily adjust the tilt position makes this flexible for many bike/accessory configurations.I installed these on my 2015 Yamaha WR250R, which have handlebar bolt spacing at ~100mm. I have an aftermarket 4.7 gallon IMS desert tank, but the handlebars are stock. I thought the included shorter bolts might bottom out without a spacer since they are longer than the stock ones, but they did not. The bar fit perfectly and securely, and did not interfere with steering or obscure my speedometer. It remains to be seen how this cross bar will hold up over time with vibration and the occasional spill, but I don't anticipate any issues at this time. Overall, I am happy with the quality for the price point.
Jane Fairchild
Reviewed in the United States on October 15, 2023
Pretty solid carbon fiber, front fork stem cross bar. Make sure to check the measurements on ur bikes front fork to make sure this cross bar lines up with what you have. Otherwise everything is pretty self explanatory. Recommended.
SirMesalot
Reviewed in the United States on October 12, 2023
This carbon fiber cross bar for motorcycles is very well-crafted and a great value! I am a woodworker and, while this is made for a motorcycle, I plan to repurpose mine to use as a handle on a cart that my mini-lathe is mounted to. The cart is a little difficult to maneuver sometimes and this will allow me to get a grip with both hands. I should mention that the carbon fiber will also give it a very classy look! This kit comes with an allen wrench and bolts for mounting to a motorcycle, but I may have to seek additional hardware for my purposes. All in all, I am very pleased with my new carbon fiber lathe cart handle!
Recommended Products