Your cart is empty.
Your cart is empty.Product Description
Direction：
There are two types of motor steering：
- CW(Fixed);
- CW/CCW(Uncontrolled);
Specification:
Model : TYD-50；
Shaft: Flat shfat；
Shaft Diameter: 5.5mm ；
Shaft Length: 11mm；
Voltage :110V；
Speed : 5-6RPM/min；
Power : 4W；
Torque:≤2.4kg*cm；
Frequency : 50/ 60Hz；
Small Power Consumption
Minimum power 4W.
Low Noise, Good Quality
Metal-plastic hybrid gear, less noise, quieter motor operation.
Small Size, Big Torque
Motor length 57mm, thickness 24mm. High torque for DIY.
Easy to Install
Small weight, easy to install and use.
Larry E Zazalack
Reviewed in Canada on January 7, 2025
Fast shipping good price snd fit perfectly to replace the original motor, thanks
Customer
Reviewed in the United States on July 10, 2024
Used this motor to fix my rotisserie on BBQ. Works perfectly and an easy fix. Way cheaper than buying a new rotisserie motor!
StraightTalk
Reviewed in the United States on June 14, 2024
Update: Correct Item arrived but delivery person through it from 10 feet away.Update 20240617: Chanc will be sending a replacement from China in 15-20 days. I will update when it arrives.Orig: I was looking for a double flat face shaft motor with same specs as my original fan motor. This one showed promise. Turns out the shaft is longer and not flush. There is no screw hole in the top of the shaft. Entirely different than the picture.
gurutech
Reviewed in the United States on December 4, 2024
I used this motor to reanimate a holiday decoration. It worked great.Specifications were all correct.
Phil T
Reviewed in the United States on January 12, 2024
I did not pay attention to the "No user serviceable parts inside" notice on the bottom of the heater. The motor was nearly an exact fit. I had to file down the shaft just a bit for the original nylon gear to fit. The heater is back in operation and oscillates normally. Saves $$ over buying a brand new heater.
JP
Reviewed in the United States on July 6, 2023
The motor rotates and powers as it should. The shaft measurement was slightly off. A manufacturing flaw, as I held it up to my burned out motor. They probably did not polish it down enough. With a little sandpaper, I was able to sand the inside of the bracket this would need to fit. Now my oscillating tower fan is working again!
Mike Lewis
Reviewed in the United States on May 7, 2023
Fixed the issue with my Lasko Tower Fan. The oscillating is a tiny bit faster now. Not a big deal. Shaft is close to the right size on the motor. I had to shave it slightly and drill a hole for the set screw. This was the closest motor with the right specs and shaft I could find.
Christina
Reviewed in Canada on December 12, 2023
Bought a vintage Santa clause that didn't work anymore. My husband pulled him apart and replaced the motor for me! This worked perfectly. He's the best.
Abilio Gomez
Reviewed in the United States on November 23, 2023
Was easy to install and pretty accurate on the R.P.M also is quiet and has a lot of power and the best is cheaper compared to other sellers. The size is accurate,the shaft was a little taller but that didn't affect the installation. Overall is good value for the money.
カスタマー
Reviewed in Japan on October 21, 2023
サーキュレーターの首振りが故障。このモーターが動かなくなっていました。種類が多く同じものを探し出すのに苦労しました。今はNETで部品が手に入るので故障をDIYで修理できSDGsに的しています。ありがとうございました。
wiremanagement
Reviewed in the United States on June 19, 2022
The motor is well made, it was delivered promptly and was priced reasonably. I ordered this motor to replace a worn out motor that oscillates my Lasko floor fan. I actually have two Lasko floor fans and after two summer seasons of 24/7 operation, the sleeve bearing on both motors wore out (badly....egg shaped). It was a not so good design application on Lasko's part since I think a motor with a sealed ball bearing on the output shaft would have not failed so quickly. But.....Lasko sells these fans for under 100.00 so there are choices to made. With this in mind, I will periodically oil the oscillating motor's main shaft since the grease that is applied during manufacture is not sufficient. The remainder of the original motor's internal gears show no abnormal wear so I am not concerned with the replacement motor giving out as long as I apply a few drops of oil to the main shaft during the time it is running. Amazon sells quite a few of these type motors and it is very important that you inspect each one carefully to choose a replacement that matches the output shaft of the one you are replacing as close as possible. There are shafts that are round, shafts that are round with a tapped end hole, shafts with one flat, shafts with two flats, shafts with all the preceding types but of different lengths. The output shafts on these motors are hardened so modifications to them will be doable but difficult. I found it a better choice to find a motor whose shaft most closely duplicated my original and then modify the plastic lever that was attached to the end of the shaft. My original motor had two flats so that is the type I bought but the replacement motor's shaft was about .030 larger across the flats so I had to modify the plastic lever to have it slip onto the motor shaft. If you are a tinkerer it will be no big deal but your careful choice of the replacement motor type will keep your modifications down to a minimum. Unless of course, you are luckier than I was and are able to find an exact replacement. All in all, this motor saved my 100.00 fan for about 13.00 and my time. One last thing- my original motor was specified as 2-3 RPM and the replacement motor was 5-6 RPM. This turned out to be fine with me since I always thought that the original motor moved the fan back and forth painfully slowww.
篠山AT
Reviewed in Japan on January 18, 2020
古い電気ストーブの首振り用モータですので、代替品がなく探しておりました、ほぼ似たようなものがあり購入いたしました、中国製の為入手に2週間かかりましたが、商品は良品でした、外形寸法が少し大きかったので、ストーブの方を加工して使用しました、問題なく可動しております。
tohrin
Reviewed in Japan on April 7, 2017
部品として販売しているのには驚いた。リペア品として交換しました。製品としては、いたって普通。
Recommended Products
$50.35
$ 22 .99 $22.99