Your cart is empty.
Your cart is empty.Product Description
Instead of shearing or sawing, Chicago Pneumatic CP835 Heavy-Duty Air Nibbler is equipped with a punch and die for use in nibbling. Heavy-duty air nibbler from Chicago Pneumatic is an ideal choice for accurate cutting of steel and aluminum metal. Power tool is ergonomically designed to work in tight corners and circles. The pneumatic air tool provides easily access to punch and die for quick replacement. Air-powered tool features a rear exhaust that leads the air away from work area. This air tool is suitable for nibbling plastic, tin, aluminum and other metals.
From the Manufacturer
The CP835 Nibbler is the most powerful air operated nibbler on the market. It has a rugged nibbling head and .177-Inch diameter punch cuts steel up to .060 -Inch (16 gauge) and aluminum up to .102 -Inch (10 gauge). Easy access to punch and die for quick replacement. Possible to place die in four different cutting positions. Rear exhaust directs air away from work area Applications accurate cutting of steel and aluminum best for tight corners and circles. Specifications: Strokes per minute: 2750, Shipping Weight: 4.00 lbs.
D
Reviewed in the United States on October 30, 2024
I hadn’t used one of these in years. This one buzzed through 18g sheet like paper. It was actually way faster than I expected.
Jimbo
Reviewed in the United States on January 11, 2021
I was very disappointed in this nibbler, which the boss bought for me to use. It]s hard to control. You can't cut a good straight line with it, unless you have a guide, and move very slowly, because the punch is round. The line will be ragged. Circles are even more problematic. And this nibbler is an air hog.
Daniel Minskey
Reviewed in the United States on September 24, 2018
This is my second bad transaction with Chicago Pneumatic. CP is supposed to be the best of the best. The first one was a nibbler that broke ten minutes into operation (yes it was oiled correctly). They sent me a new one that seems to be working ok. Next transaction was an incorrect order...wanted a pneumatic drill received a die grinder.
Q
Reviewed in Canada on December 9, 2017
Good tool. Thought I was getting a red one like all my other CP tool but its just bare metal finish
SusieT
Reviewed in the United States on May 25, 2016
this did work on 0.63 aluminum sheet. My compressor is 2 HP, 30 Gal, rated 5.5 SCFM @ 90 PSI. Tried 1.25 aluminum sheet and didn't work well. Right after the first 3 ft cut, it stopped working. After researching on the web, somebody suggested it might be because the nibbled aluminum pieces get jammed into the canal where the punch oscillates. I had to remove the cuff and clean the jam every so often but after doing that for 20 times or so it stopped jamming every 2 inc and started working smoothly. It can be very frustrating at first. This does use air a lot and ideally bigger compressor will do better with this tool but manageable with this compressor.
Susie Ft. Myers
Reviewed in the United States on March 19, 2016
Great product
S. Cunningham
Reviewed in the United States on July 6, 2012
This thing kicks asz. It did not work on the metal I needed it for because the nibbler back opening was a little to small since this is only made for 16 gauge. It will eat 16 gauge like butter. This uses alot of air so you better have a good compressor if you want it to shine. If they made the opening bigger I bet this could eat its way through thicker metal. Chicago Pneumatic really make s some nice tools.
Jordan Hanash
Reviewed in the United States on January 31, 2010
i appreciate quality tools (especially having used 2nd rate tools before). this is by far the best nibbler and would highly recommends it over the ingersol and other nibbler for its accuracy and quick and smooth cuts. cut 18 gauge stainless like cake.
Robert J. Hudson
Reviewed in the United States on August 9, 2009
I purchased this nibbler after doing some research on the net regarding stainless steel and aluminum cutters. This nibbler was rated for 16 gauge thickness on steel and up to 10 gauge on aluminum. From what I read it was estimated that the nibbler could go up to 18 gauge on stainless steel which we had no problem cutting through. Cutting through 10 gauge aluminum was also not a problem. We were surprised that the nibbler was round rather the the more typical rectangular head as this can make a difference in detailed cutouts. We were just making hole cutouts and for that this tool worked well. One concern I have is the amount of air required for long cuts. Our compressor is a 4.5 hp, 120 psi, with a 30 gal capacity and it was easily overwhelmed by this tool. Obviously it is for industrial use and not home use as once the pressure had dropped from 125 psi to 75 psi the compressor could barely stay up with it. Once the pressure had dropped to 75 psi the cutting capability and speed were greatly decreased although the unit continued to cut through both materials at this low pressure. I would recommend this nibbler to anyone with a large (15 hp+) compressor.
Recommended Products
$71.60
$ 33 .99 $33.99