Shopping Cart

Your cart is empty.

Your cart is empty.

Compression Sleeve Puller Tool, Ferrule Puller for 1/2' Compression Fittings to Remove Nut & Ferrule without Damaging Pipes

5.0 (8) Write Review
Free shipping on orders over $29.99

$8.99

$ 4 .99 $4.99

In Stock

1.Size:Compression Sleeve Puller Xl


  • Special Note: when using the compression sleeve extractor removal tool, we may encounter a slight dimensional error between the compression sleeve nut and the extractor tool bolt(or the compression sleeve nut that needs to be replaced may be damaged), resulting in a less than 100% fit between the nut and the bolt. when this happens, please do not worry, it will not affect any disassembly or pulling operation. we can simply tighten the bolt to a depth sufficient to pull the compression sleeve out，no need to fully screw in bolts。each product has been tested many times and is strong enough to pull out our compression fittings
  • Non-Destructive Removal: This compression sleeve puller is designed to remove compression sleeves and rings from copper pipe without cutting into the pipe, easily removes compression sleeves without damaging the wall or the pipe, a must-have plumbing tool for your plumber's toolkit
  • Easy to Operate: Quickly removes nuts and collars in just four steps: remove old compression fittings or old angle valves, screw the pipe nut onto the gold threaded port of the pulling tool, make sure the ferrule puller tool is aligned with the pipe, and turn the handle about 10 turns to remove the nut and ferrule
  • Excellent Durable Quality: This Compression Sleeve Puller Tool is made of high-quality materials, not only has excellent corrosion and abrasion resistance, but also in the extreme case of severe corrosion or freezing of supply stops, you can still easily turn the lever to remove the old compression sleeve from the pipeline smoothly
  • Say Goodbye to Pipe Leaks:The compression ring removal tool makes the removal process quick and easy, saving you a lot of time and effort and reducing repair costs. If you have any questions or problems after purchasing the ferrule removal tool, please let us know in time, we will be happy to serve you


Product Description

How does this remove compression sleeves?

ferrule puller

Step 1

  • Loosen and remove the old compression fitting or angle stop using wrench.
compression sleeve puller

Step 2

  • Insert the head of the ferrule puller directly into the inside of the copper pipe.
compression sleeve puller tool

Step 3

  • Thread the water pipe nut onto the threaded mouth of the puller tool and tighten the compression nut counterclockwise about 2 to 3 threads.
plumbing tools

Step 4

  • Rotate the handle of the puller tool clockwise,applying steady pressure. The compression sleeve should come off cleanly after a few turns.

  • Easily removed by tightening the compression nut 2-3 threads counterclockwise and turning the handle clockwise a few turns.

  • No, only for 1/2” copper pipes


bmacki
Reviewed in the United States on March 22, 2025
Works perfect, especially good in tight spaces.
torch892
Reviewed in the United States on March 12, 2025
A really handy tool to have on hand, when replacing faucets and toilet valves.
Brian Klasing
Reviewed in the United States on February 15, 2025
Time saver on this purchase. Repairs typically go better when you have the appropriate tools to do the job. Had repair done in a few minutes. Who knows how long it would have taken had I not had this tool. Thumbs up!
Customer
Reviewed in the United States on January 22, 2025
I see no reason why the product would not have worked perfectly, but I discovered after the fact that the threads did not match the nut on my shut-off valve.That is a me issue not a product issue.I am only writing this to help other novice plumbing repair individuals remember to verify their thread dimensions before purchasing.
Gene A August
Reviewed in the United States on April 3, 2025
This tool does not have the threads that is necessary for the job. The threaded piece I have are pipe threads. The tool in question isn't for pipe thread, it's either USS or SAE, but definitely not pipe.Can you put me in the right direction ?
Ray the Master plumber
Reviewed in the United States on April 12, 2025
I am a Master Plumber and this works great I have only pulled 50 or 60 nuts so far but it seems to be working well. Great buy.
raksman
Reviewed in the United States on April 11, 2025
This tool came in very handy for removing those stuck old crushed washers. Having my home renovated, almost all my faucet and toilet shut-off valves need replacement (11 total). I remember replacing one before, I got this tool. This is a must-have for do-it-yourselfers. Good buy, good value.
Joel M
Reviewed in the United States on December 21, 2024
First one I received was damaged. The tension bar was broken off. The sent a second one as a replacement but it was delayed. I tried to make the first one work but it does not thread on to the Brass Craft compression nut. So it’s pretty much useless. I will probably cancel or return the replacement as well. Also the part that supposed to fit into pipe is too big. Though it is 1/2”. This is just poorly made, being the cheapest ferrule puller on Amazon.