Your cart is empty.
Your cart is empty.Includes all four items needed to connect a beer line to your draft beer system. Includes 1 of each for 1 connection: Beer Wing Nut, Washer, SS Elbow Tail piece to connect to 3/16'' ID tube and Clamp. Wing Nut can be tightened by hand eliminating the need to have a wrench available. Elbow Tail Piece is useful where space is limited so that beer line will not need a sharp bend. Tail Piece is made of 304 Grade Stainless Steel which is more sanitary and durable. This ensures that contact with beverage is 304 Grade SS. Good for use with Beer, Wine, Coffee, Water etc.
Luc Laforge
Reviewed in Canada on April 7, 2025
Good
Gary Mahoney
Reviewed in the United States on June 14, 2022
Just as described. Used it to convert corny keg set up to commercial keg.
Jeff
Reviewed in the United States on July 15, 2021
I didn't use every part of this kit since I was refurbishing a kegerator that still had some of the parts, but the parts I did use worked great, and the parts I didn't use seemed true to the original. I'd buy again.
Michel Vienneau
Reviewed in Canada on July 7, 2020
Received something else, probably of lesser value....
Rocky Pittie
Reviewed in the United States on July 27, 2020
I bought this to change the factory beer line length to make it longer because I kept getting too much foam in my beer. This connected perfectly to the original items, worked great without leaks and pours the beer without an issue. None of my local beer stores stocked any items like this but even if they did they wanted twice the price.
Tazman
Reviewed in the United States on June 15, 2020
Worked great for me, needed a nut for a CO2 line I over tightened, this was the exact size, the hose attachment is not, but the old one was fine as I only broke the nut.
aise
Reviewed in Mexico on November 21, 2020
Perfecto
gaguilar
Reviewed in Mexico on May 16, 2019
Exactamente lo que necesitaba, con el tamaño correcto como esta indicado
Reading_freak2048
Reviewed in the United States on October 17, 2018
This product is great except for the o-ring. It is MUCH too thick and prevents your line from threading on correctly. Beer went everywhere. I had to go buy one about a third of the thickness of the one provided. As such, I could not honestly give this product a 5 star review. Please swap out the o-ring! Great package otherwise.
Gourmiel2018
Reviewed in Mexico on October 17, 2018
Buena calidad de estos conectores, se adaptan perfecto a los equipos y conectores.
Bwatson
Reviewed in the United States on October 11, 2018
I bought a used kegerator and it was missing this very important piece. Got it two days later and it was exactly what I needed
David G Brown
Reviewed in the United States on August 24, 2017
Quality materials. Does what it is supposed to do. I've posted a photo to help others that are unsure about how the parts should be arranged for a proper installation.
Jeff McCall
Reviewed in the United States on June 14, 2017
I will embarrass myself writing this, but do so in case others attempt to connect these incorrectly (as I did). When you receive this, the o-ring will be inside the hex nut. You need to take the o-ring out first so it can be placed between the shank and the tailpiece. I left mine in the hex nut (It looked like it was in there for a reason, hahah!) and inserted the tailpiece through the back the hex nut (so it looked like the o-ring was getting squeezed through the front of the hex nut). This was obviously improper and lead to leaking. It was easily fixed but can lead to a compromised o-ring.So your install order should be: Shank -> o-ring -> tailpiece/hose barb -> hex nut -> worm clamp (remember to put this on your tubing before attaching to tailpiece hose barb)Don't be like me. Be much smarter than me.
Recommended Products
$33.45
$ 15 .99 $15.99