Your cart is empty.
Your cart is empty.Product Description
Creality Ender 3 Build Plate Ultra Flexible Removable Magnetic Build Surface Hot Bed Cover Compatible with Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5/Ender 5 Pro/Ender 3 S1/CR 20/CR 20 Pro ANYCUBIC Kobra Voxelab Aquila C2 S2 X2 ELEGOO Neptune 2 2S
Note: It is not suitable for Ender 5 S1, Ender 3 S1 Pro
INSTRUCTIONS:
This magnetic bed accessory is divided into two parts: A (upper)+B(lower)
-Part A: The top is a matte surface, and the back is magnetic (the interaction with the front of Part B plays an attractive role)
-Part B: The top is magnetic (with the adsorption under the A part), and the back is the adhesive (posted on the printer platform, which plays a fixed role)
-If it fails to adsorb, please rotate it 90 degrees and try again.
NOTE:
This magnetic bed is not applicable for print activity in which the temperature is above 70 ℃, not for PLA +, and not recommended for printing ABS filaments.
Black Frosted Surface Coarse Sand Design
The surface of black frosted with coarse sand has strong flexibility and heat resistance, Easy to stick and remove the model.
Soft Magnetic Sticker Easy To Remove The Model
Soft magnetic sticker of strong flexibility. Directly removes the model and is easy to be installed and removed.
Simple Installation, Quick and Convenient
Tear the gum, flatten the sticker without bubbles and direct adhesion, and down to print after a simple adjustment.
Suitable for all FDM printer models, and all heated and non-heated 3D printer beds. Applicable materials: PLA, TPU, nylon, etc.
ian
Reviewed in the United States on April 6, 2025
One thing to know, CHECK the directions before applying the magnetic strip. I accidentally placed it sideways and had to reapply it the right way for the sheet to stick properly.
L. Shapiro
Reviewed in the United States on June 23, 2024
Before I learned about these flexible magnetic covers, I was resorting to placing my build surface in the freezer to remove my 3D prints. Now I can just peel off the magnetic cover (after removing the binder clips that add extra security), gently bend it away from my print, and the print comes right off.
Aaron
Reviewed in the United States on March 1, 2024
Weak magnet - doesn't stick to well to bed compared to spring steel ones. Several layer shifted parts.
Customer
Reviewed in the United States on December 31, 2024
Pretty easy to install, mainly have to apply the magnetic sticker onto the existing build plate, and bam, your mat is ready to place. Provides a better way to flex prints off, rather than peeling. When it's brand new, I've had a few of these, they stick extremely well, almost too well, although that may also be my nozzle is too close.Anyway great mat, 5 stars, inexpensive. Easy to use.
Yasz
Reviewed in the Netherlands on May 28, 2023
Should have bought it sooner! Sometimes I broke the printed items while pulling them off the glass plate. No need to break my time costly prints with this flexible sheet! I don't understand the negative reviews, because when you read the instructions it's kinda failsafe. If your plate shifts midprint you didn't line the sheet up right with the adhesive magnetic sticker. Just ordered a second sheet so I can switch plates easily.
Jay Shelton
Reviewed in the United States on March 9, 2023
Works like new. However, this is not necessarily a quick swap for the original magnetic build surface. One would think that buying the same brand that came on my Ender 3 Pro would allow me to just swap the magnetic surface, but you'd be wrong. The magnetic poles are not consistent which required me to remove the magnetic base sticker and replace it with the one that came in the package. The adhesive is extremely strong which resulted in me needing to hand flatten the aluminum plate after removal.
KA-Reviews
Reviewed in the United Kingdom on February 12, 2023
Honestly should of bought this way sooner than I did even though the glass bed I originally had was okay ish the adhesion started to fade and even with hairspray or glue sticks it just was not happening (Yes my bed was level)This is super easy to apply just one note is take your time and you'll get it perfect.Definitely worth getting for prints and makes them soo much easier to remove would highly recommend.
Heiko Tauber
Reviewed in Germany on February 11, 2023
Nach dem ich Probleme mit der Original Glasplatte hatte habe ich mich für dies Magnet Folie Entschieden.Dadurch konnte ich eine noch genaueres Leveln des Bettes erreichen.Die Haftung machte bei den ersten Drucken auch ein sehr guten Eindruck.Was die Platte bzw der Magnet nicht so mag, ist eine zu hohe Druckbett Temperatur. Hier wird die Magnet Leistung schwächer.Würde ich wieder Kaufen und Empfehlen.
Charles W Shaffer
Reviewed in the United States on October 21, 2023
I have one of the original Creality printersManual level works greatThis new one has a smaller base but does a nice job I just set it and let it do it's job come back perfect right out of the box just a few little tweaks and your printer will print greatEasy set upSoild constructionJust check the bolts anyway to be ahureeGood. Dependable useSet level fist time been running the unit for a week non stop day/nightMaking large rc planePerfectly
Alphabetlicks
Reviewed in the United States on January 27, 2023
Prints are easily removed (only tried PLA) only issue i had is the reduction of magnetic field while the bed heats. It enough to keep it on the bed, unless your cables clip the top plate. I had one print fail about 3hrs in do to the cords hitting and sliding the plate halfway off the bed.However I printed some cable chains and have no issues since.
MiguiOceano
Reviewed in Spain on July 12, 2022
The media could not be loaded.
Scott B.
Reviewed in the United States on March 4, 2022
I should've looked closer at the other reviews before purchasing - somehow I didn't notice the substantial number of recent 1 star reviews but now I see why.After a single test print it was nearly impossible to remove the print, and it left behind a thin layer of PLA that seems permanently stuck to the surface.And now all I can think about is how much of a pain it's going to be to remove the large adhesive magnet from the print bed in order to go back to the standard glass bed...This is just completely 100% useless as a print surface.
Dachi.Dant
Reviewed in Italy on March 22, 2021
Eccellente qualità prezzo, ho risolto tutti i problemi di adesione per le stampe. Il piatto magnetico è immobile una volta posizionato e le stampe a piatto freddo si staccano subito. Stampato ABS, PLA, TPU, PETG
Recommended Products