Your cart is empty.
Your cart is empty.This undercar shield is designed to match the fit, appearance and function of the original shield on specified vehicles, and is engineered for durability and reliable performance. This part is compatible with the following vehicles. Before purchasing, enter your vehicle trim in the garage tool to confirm fitment. [Chrysler 300: 2005, 2006, 2007, 2008, 2009, 2010] - [Dodge Challenger: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017] - [Dodge Charger: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014] - [Dodge Magnum: 2005, 2006, 2007, 2008].
Eric H.
Reviewed in the United States on May 24, 2025
Great Fitment
Mike Miglin
Reviewed in the United States on September 2, 2024
This one is for 300c with AWD. The non-AWD version does not fit.
Crazymanmo
Reviewed in Canada on August 6, 2024
Fit my Dodge charger, more economical then some of the other dealer brands
Vickie Fields
Reviewed in the United States on August 10, 2024
We thought this would work, but it because of damage done for cutting the old one off, it couldn't be hooked up. It was cut off before we bought the vehicle. Not ours or your fault. Previous owner must have cut it off.
Papa
Reviewed in the United States on July 22, 2024
This splash pan fit my 2018 Dodge charger SXT perfectly,absolutely no cutting , drilling or cussing involved I know that the product description says that it does not fit but that is wrong .Ten minutes using the new screws that came with the piece and I am on the road again . Thank you Dorman,and thank you Amazon .And the best part is that it was about one third the price of the local Dodge dealerYa gotta love that
Mr B
Reviewed in the United States on December 4, 2024
Flawless
Jason Johnston
Reviewed in the United States on October 3, 2024
Perfect fit thicker than one it was replacing
CRG
Reviewed in the United States on March 26, 2023
Item looks to be a good study build. Had two small issues. Holes did not match up and had to drill two new holes about a half inch from provided. Also one of the included bolts was defective so Iām currently short a bolt until I can find a replacement. Attempted to contact seller, but have not heard back.
Jason
Reviewed in Canada on April 8, 2022
Fit great. Easy to install.
Stan Broda
Reviewed in Canada on September 7, 2021
I installed this on my 2016 Challenger SRT and it fir perfect. MIne was missing so it was nice that it came with the mounting bolts as well.
Denis B.
Reviewed in Canada on June 4, 2021
Easy to install. Great product quality for the price.
simmaxmarc
Reviewed in Canada on August 21, 2018
I was surprised the quality of this plastic skidplate was very good, it looked at least as good as the original cracked-up one I removed. However, you may find that the fit of the 4 bolt holes might not quite line up, and require some extra effort. On my car, the 4 holes didn't line up perfectly, especially since this unit is supposed to bolt on UNDERNEATH the front "chin" skidplate, that bolts to the bottom of the front fascia. What worked for me was to get the 4 bolts started just a bit while muscling around the skidplate, and when they're all started, you can then tighten them all.
Joubert
Reviewed in the United States on August 29, 2016
NOV 2020 - I had to buy another one to use on my car after the first one got totally CHEWED UP with hard crusty snow last winter.Same as before: I got the item this time in a single box with bubble wrap and the 4 new 10mm bolts. The shield is on and working as before, but be aware that something this inexpensive WILL get sacrificed when you run into or have to drive over something like the ice-crusted snow as I did. ;-)Part arrived well packaged in two heavy cardboard boxes and wrapped in bubble wrap. Included were 4 new 10mm bolts to install the shield on the car. I was able to slide the shield in and remove the crusted old bolts with a bolt and nut remover. Once the bolts were started in the existing threads the bolts tightened down and I was able to torque to 35 in lbs as stated on the shield. The car engine is now shielded from dust and other road filth, and it only took about 15 minutes to install, due to the existing rusted bolts. The part is not flimsy, but feels nice and sturdy. Recommended, given the low price.
Recommended Products
$59.99
$ 26 .99 $26.99