Your cart is empty.
Your cart is empty.Product Description
Having the proper Post Poles makes installation so much easier compared to doing it yourself and purchasing E&K Sunrise Post Poles makes life so much easier for you. Ideal for patio, garden, deck, backyard, playground or other outdoor area installation.
E&K Sunrise Post Poles
This is the Post Poles required to install a square or triangle shade sail to any structure.
You can mount it soft ground or hard ground, It can be mounted onto existing concrete, cement or other surface depending on where your shade sail, canopy, awning or tarp is located. wherever you want it. The Post Poles helps to strengthen your sun shade and make it more safety so that it will not be shaken or rocked by the freeze, strong wind or other bad weather conditions.
- Made from powder coated steel
- Grade of 316 Stainless Steel, Never Rust.
- Corrosion and impact resistant
D-Ring Clamp
There are 3 D-Ring Clamps for 112" or 120" post pole. Shade sail pole kit come with a D ring clamp allowing you to attach multiple shade sails to the pole. You can buy this D ring clamp separately if you need more.
Base plate
It can be mounted into grass, soil, clay or onto existing concrete, cement with the base plate (120" poles needs to purchase separately) and 4 Concrete Anchor. or other surface depending on where your shade sail, canopy, awning or tarp is located.
Thread
Connected two section pole by wrench(do not included) and tighten the threads. Upgraded screw, better construction, more durable and sturdy. No bending of the pole when shade sail is tensioned.
Galvanized
Made from heavy duty galvanized powder coated steel for extra strength. Corrosion and impact resistant. Heavy duty steel makes it work perfectly to withstand strong wind or extreme heavy rain.
Sail Pole
Application
Modern warehouse management
keith bishop
Reviewed in the United States on July 16, 2023
I used these to hold patio lights and sailcloths between 6 sets of these poles, 2 with extensions. They are heavy and will never individually bend!I mounted 18-24" deep in concrete and each base pole is perfectly vertical. The joints screw together with blind threads so it is aesthetically clean. The problem is the thread spec is coarse but not deep enough to seat properly to keep aligned, and while they get very tight when assembled with no sideways pressure (I tightened with pipe wrenches), after connecting up the lights and sailcloth with pressure from the spans of 15-20 feet, the joints pull and cock the pole at each joint above the base (fully vertical) pole. See my pix. So the upper sections of the poles are not vertical. Over $700 spent to end up with this problem.My solution unfortunatly will have to be to tack weld each joint, since they are installed in concrete and I can't remove the base pole without making a mess. I'm not worried about them coming apart... they are very strong. Its just the thread joints are not standard NPS or NPT.The manufacturer needs to change the thread and joint design to make this a 5* product.
Mike Eylander
Reviewed in the United States on March 31, 2022
The poles look wonderful, 3 pieces that screw together SOLID, or so I thought. I bought the poles last year and stored them in my shed until this spring to put up a shade sail. I put up the shade sail and all was good temporarily. I had placed the bottom third of the poles in concrete. Then I screwed in the other 2 poles and erected the shad sail. The next morning one pole separated by the bottom screw part and fell over. After I screwed it together again, I pushed on the pole and the pole came apart again. Somehow the screw part of the pole is not holding much force at all. Now I have 2 parts of the poles in concrete, shade sail not erected, and poles that won't hold a load. All I want is for the poles to work. Help?
John Salazar
Reviewed in the United States on September 16, 2021
Did not receive bolts for base plate
Ryan Sylvester
Reviewed in the United States on August 3, 2021
I installed three of these so far for my sails. two of them fell apart in the wind, sail attached pulled the sections apart. The threads on the sections strip out easily. So I put them back together and put a stick of rebar down the post and filled with concrete. Very strong now. Just a suggestion when using.
LEH
Reviewed in the United States on July 4, 2021
Bought 6 of these (4 -126” and 2 -140”) to support three 12 ft x 12 ft sun shade sails. Liked the fact that can be screwed together. However, the threaded joints are the week link and the poles will bend or break at the threaded joints. After a couple of windy days (40 mph wind) several of the poles were bent and one broke. Have replaced two of the poles with 3” diameter pipes that I bought from a local steel supplier for for about the same price as what I paid for one of the post from Amazon.
Customer
Reviewed in the United States on June 7, 2021
The bases are heavy-duty and powder coated. The anchor holes are 5/8, so there's some tolerance for drilling exact anchor placement holes in concrete when using 1/2 Red Heads. The connecting threads for the separately ordered uprights are pressed in to the base steel pipe . . .some times not so perfectly square.
altolleson
Reviewed in the United States on June 17, 2021
We put our poles together and cemented them into the ground, attached our sail in the backyard. Less than an hour later both poles had fallen over and come apart at the seams. Bad thing is we had not tightened the sail yet. The poles both came apart in the direction of the sail.
Steve Fenner
Reviewed in the United States on May 23, 2021
Worked great, moved further back then it needed to be so it was out of the way between the trees. Also found it was easier to tighten the joints after it was placed in concrete.
Recommended Products