Your cart is empty.
Your cart is empty.Product Description
The cooling fan clutch is a cooling system component that controls the operation of the engine cooling fan. When the engine overheats, the radiator needs the help of the cooling fan to blow air into the device. After the engine reaches the proper operating temperature, the fan clutch will be mechanically disengaged, thus saving some power for your vehicle.
Item Specification
Item Type: Engine Cooling Fan Clutch
Placement on Vehicle: Front
Material: Steel
Rotation: Reverse Rotation
Reference Number: 52028789AE, 2748
How to Replace a Bad Fan Clutch
Removing the Fan
Mechanically driven fans with four bolts
Loosen the bolts in the fan cover to remove the fan. After that, disconnect the fan shroud and remove the shroud. Pull out the nut that secures the fan to the pump pulley, hold the fan and pull it forward with a slight rocking motion until the fan is loose and finally comes out.
Cooling fan with large nut
Disconnect the fan sealed by the large nut. Insert it around the bolt on the pulley. Use a large wrench to turn counterclockwise to loosen the nut.
Disconnecting the Clutch From the Fan
Set aside the detached fan. Make sure that the shaft is up. Use the suitable socket and ratchet to remove the bolts that fasten the clutch to the fan.
Installing the New Fan Clutch
Align the new fan clutch in the position and secure it to the fan by tightening the bolts. After that, reassemble the fan and shroud.
The replacing steps are only for reference, and we recommend you to ask the technician to do the installation.
Maurice Neel
Reviewed in the United States on December 3, 2024
Quick replacement with exact fit and now no noise from old faulting fan clutch.
Ubaldo M.
Reviewed in Mexico on October 5, 2024
Muy mal producto, solo me duro dos meses y ya se amarró, ya no funciono.
Denis
Reviewed in Canada on July 11, 2022
Correspond à la pièce d’origine Et a été reçu dans les délais.
mopar
Reviewed in the United States on August 6, 2021
Ordered for 4.7 engine i was rebuilding Engine was making a very loud noise sounded like one of the new timing chain tensioner was not working, took front of engine apart NPF put back together, Turns out the rapping was coming from the new fan clutch i bought off Amazon was making the noise of course the time to return it passed.
Chris and Brittany
Reviewed in the United States on June 28, 2021
Easy install if you have the tools. Working good so far
Irena Martinova
Reviewed in the United States on March 2, 2020
It’s not working properly. Not worth the money.
ed domede
Reviewed in the United States on December 5, 2020
great quality,great price and great performance.
jess
Reviewed in the United States on December 26, 2020
works great
Klad31
Reviewed in the United States on September 21, 2019
Great product if u want quiet operation no noise this is the clutch for hemi 5.7
James c.
Reviewed in the United States on June 27, 2019
Truck
Recommended Products