Your cart is empty.
Your cart is empty. Vintage-style chrome bridge assembly for use on most Standard, Deluxe, Roadhouse™, Lone Star™, and Blacktop left-hand Stratocaster models manufactured from 2006-present.
Includes six bent "Fender"-stamped saddles, intonation screws and springs, and saddle-height adjustment screws. Mounting hardware, tremolo claw, tremolo springs and tremolo arm not included.
Note that 2-1/16" bridge mounting spacing means that bridge-mounting screws will not fit vintage or vintage reissue instrument unless modified to do so.
Roger
Reviewed in Canada on March 25, 2025
The quality is there but with so many different strats it is hard to find the proper one. Some are mm and other in inch.
Daryl Jan Swanson
Reviewed in the United States on March 1, 2024
I liked it very much , It seems to me that some of these products might be seconds or overstock, but they have given a Bridge with Fender stamped on the saddles just like a real Fender, Squire`s do not and they also do not have a full size Block like the one given here, and it is beleived that the full size block helps with sustain,
Darran L. Wilson
Reviewed in the United States on February 24, 2024
Excellent product but without mounting screws!
Starchild
Reviewed in the United States on March 1, 2022
A lot of quality for the buck, just waiting for right opportunity to use.
Charla M.
Reviewed in Canada on November 9, 2022
Easy five stars. High quality Fender product for a low price. I can confirm that the Fender logo does appear on this product. Genuine Fender.
George R. Koch III
Reviewed in the United States on November 1, 2021
This was a drop in replacement on the monoprice indio cali strat. No modifications were made, and I was able to reuse the original screws in the monoprice. My impression is that the this tremolo has a brighter tone and slightly more sustain then the original monoprice tremolo, which is most likely a zinc alloy. In both the original setup and the fender bridge setup, I had decked the tremolo for tuning stability; I might later float this fender tremolo as it seems more stable.Caveat: I replaced the tremolo at the same time I did a copper tape shielding upgrade and replaced the strings. The shielding got rid of the hum; and I think this bridge also improved the tone and sustain, but some of that could be attributed to fresh strings.
rene regnier
Reviewed in Canada on October 29, 2021
pour remplacer un tremolo cheap avec un petit bloc celui la sonne plus
k firby
Reviewed in Canada on January 14, 2021
I only bought it for the saddles and longer height adjustment screws. I have not as yet used this product but as this is a fender part it should be good.
AppleTech
Reviewed in the United States on August 29, 2020
I got this to see if I could mod a 2020 LH Squire 70's Vibe Stratocaster. The squire appears to ship with a 2 1/16" string width bridge from the factory, but the block is significantly smaller causing shorter string sustain. The modification was pretty simple, just watch the ground wire on the claw arm that the springs hold on to. One thing that did miff me was the Tremelo arm for the squire does not thread. I pulled a tremolo arm off my 1990's American Strat and that worked. this is Fenders shortcoming, not the seller. Put on new strings, did a quick setup and it's a different guitar; better without a doubt.. No drilling was needed, took all of about 15 minutes. it looks like the back plate would fit back on but I'll leave it off because I prefer it off.the Squire Affinity Stratocasters are 1 5/8" or 22mm thick so this tremolo is not going to fit in the body, the 45mm thick Squires and Fenders will work, but depending on your saddle width it may not fit older squires or fenders.
adam rogers
Reviewed in the United Kingdom on November 15, 2020
Bought to replace the stock tremalo in an old encore strat project I've been working on. Just dropped right in and the screw holes matched up perfectly. Took minutes to install, looks great and the build quality is excellent. The difference is night and day.Would highly recommend!
John Korsedal
Reviewed in the United States on June 18, 2019
Installed and set up in about an hour. Fits perfect. Beefier block definitely improves sustain. Great upgrade for the price!
kbgulfcoast
Reviewed in the United States on February 6, 2014
This would be standard import 6 point 2 1/16" string spacing lefty tremolo, fitting most import strat style guitars and fender mim guitars.I have installed on various import strat copies with ease and great success. A must upgrade to the thin cheap zinc pot metal tremolo bridge,.. with this hefty STEEL high mass block and STEEL vintage fender saddles, will transform strat styles tuning stability and sustain and that highly sought twang. Also improves string changes with no ball ends getting stuck in holes like cheap zinc. This bridge along with quality tuners, string nut and string trees is what's the real deal from the untuneable unstable string paths built these days. I place this on top of that list as the anchor for holding string tension where tremelo can actually be used without knocking tuning out every time.Included is bridge assembly with block, plate, vintage saddles only, require a standard fender mim tremolo arm... About 10$ and either use existing springs, or get those also. So all total about 30$ best upgrade ever! Look at the gotoh and Callahan 30$ is a great deal... Hard to find lefty. I have had occasion where block is just past flush on back cavity but who cares? Most leave backplate off anyway or just trim the plate to fit it. Had one issue where the cavity was little shy for this big block but 10 min with a hand file and bit of black paint to cover my woodworking worked perfect.The main thing is your six screw points line up at 2 1/16" , use your existing screws or get some, once installed this thing is smooth and proper feeling, like should be.Later added: had occasion to nice pearloid back plate and wanted to keep on for nice look but was just past flush with block so... I had old bike tire tube and cleverly cut a gasket, found some slightly longer screws at hardware store came out nice, and gives something to stop buckle rash too... Cost maybe 1$?
Helga
Reviewed in the United States on November 26, 2013
Nice product for the money. Made in Taiwan, for those wondering.NOTE: The block on this thing is pretty deep (1 5/8"). There's a good chance the block and springs will stick out a little bit on a slim profile guitar. It happened to me. Nice enough that I'm keeping it anyway.Really solid upgrade for under $20. The bent saddles alone are pretty much worth it. if you have a beater Strat with the correct spacing, this is a great way to add some class and performance for cheap.
Recommended Products
